[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
bug#45517: Failed boot on arm32 with u-boot due to missing requirements
|
From: |
Mathieu Othacehe |
|
Subject: |
bug#45517: Failed boot on arm32 with u-boot due to missing requirements with the distro boot protocol |
|
Date: |
Wed, 30 Dec 2020 15:35:48 +0100 |
|
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/27.1 (gnu/linux) |
Hello Denis,
> I then built it with:
>> cp `guix system disk-image --target=arm-linux-gnueabihf lime2.scm` \
>> guix.img
>
> However when booting the image, u-boot doesn't find
> /boot/extlinux/extlinux.conf.
>
> However running the following command in u-boot makes the board boot:
>> sysboot mmc 0:2 any $scriptaddr /boot/extlinux/extlinux.conf
>
> When we look at the resulting image with fdisk -l we have:
>> Device Boot Start End Sectors Size Id Type
>> guix.img1 2048 83967 81920 40M ef EFI (FAT-12/16/32)
>> guix.img2 83968 3301783 3217816 1.5G 83 Linux
The default image type creates an EFI partition which is not desirable
here. You should try again running this instead:
--8<---------------cut here---------------start------------->8---
guix system disk-image -t arm32-raw lime2.scm
--8<---------------cut here---------------end--------------->8---
Thanks,
Mathieu