[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
bug#54064: Packaging request: Ultimaker Cura
From: |
Jacob Hrbek |
Subject: |
bug#54064: Packaging request: Ultimaker Cura |
Date: |
Tue, 22 Feb 2022 18:32:12 +0000 |
kreyren@leonid # dmesg -w
...
[1112144.472508] usb 2-1.4: new full-speed USB device number 52 using
ehci-pci
[1112144.581981] usb 2-1.4: New USB device found, idVendor=1a86,
idProduct=7523, bcdDevice= 2.64
[1112144.582001] usb 2-1.4: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[1112144.582008] usb 2-1.4: Product: USB Serial
[1112144.582624] ch341 2-1.4:1.0: ch341-uart converter detected
[1112144.584305] usb 2-1.4: ch341-uart converter now attached to ttyUSB0
kreyren@leonid $ ls /dev/tty[^0-9]*
/dev/ttyprintk /dev/ttyS14 /dev/ttyS20 /dev/ttyS27 /dev/ttyS5
/dev/ttyS0 /dev/ttyS15 /dev/ttyS21 /dev/ttyS28 /dev/ttyS6
/dev/ttyS1 /dev/ttyS16 /dev/ttyS22 /dev/ttyS29 /dev/ttyS7
/dev/ttyS10 /dev/ttyS17 /dev/ttyS23 /dev/ttyS3 /dev/ttyS8
/dev/ttyS11 /dev/ttyS18 /dev/ttyS24 /dev/ttyS30 /dev/ttyS9
/dev/ttyS12 /dev/ttyS19 /dev/ttyS25 /dev/ttyS31 /dev/ttyUSB0
/dev/ttyS13 /dev/ttyS2 /dev/ttyS26 /dev/ttyS4
Looking at the output it seems to be looking for ^\/dev\/ttyUSB[0-9]+
for various baud rates on stock Creality Ender-3
> I don't know anything about your context, BTW ;) -- Richter
Elaborate?
On 2/22/22 19:23, Bengt Richter wrote:
On +2022-02-19 14:27:42 +0000, Jacob Hrbek wrote:
Ultimaker Cura is a powerful LGPL-3.0 licensed STL-to-GCODE generator
(https://github.com/Ultimaker/Cura) used for 3D printing.
Additionally it is capable of enabling printing through USB on GNU Guix
which is currently not possible as no guix package is able to recognize
and send fabricating instructions to /dev/ttyUSB0 which is provided by
the printers (note that the user has to be in `dialout` group in order
to use the device).
I get this (i.e., S1 instead of USB)
--8<---------------cut here---------------start------------->8---
$ ls /dev/tty[^0-9]*
/dev/ttyS0 /dev/ttyS1 /dev/ttyS2 /dev/ttyS3
--8<---------------cut here---------------end--------------->8---
What do you get?
I don't know anything about your context, BTW ;)
--
Jacob Hrbek, In support of ukraine sovereignty #supportUkraine
pub EdDSA 256/AB42FCA9 2021-01-21 kreyren@rixotstudio.cz
<kreyren@rixotstudio.cz>
sub ECDH 256/86142789 2021-01-21
--
Regards,
Bengt Richter
--
Jacob Hrbek, In support of ukraine sovereignty #supportUkraine
publickey - kreyren@rixotstudio.cz - 1677db82.asc
Description: application/pgp-keys
signature.asc
Description: OpenPGP digital signature