[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

bug#55907: VFIO kernel module fails to capture PCI device

From: Nick Zalutskiy
Subject: bug#55907: VFIO kernel module fails to capture PCI device
Date: Sat, 11 Jun 2022 09:40:18 -0400
User-agent: Cyrus-JMAP/3.7.0-alpha0-692-gb287c361f5-fm-20220603.003-gb287c361

Hello all,

I am trying to capture my graphics card at initrd, using vfio, to later pass it through to a virtual machine. Judging by dmesg, the VFIO module does load early, however, the card is not captured at that point and the amdgpu driver is later loaded instead.

This is what I have in my `operating-system` config:

(kernel-arguments '("iommu=pt" "vfio-pci.ids=1002:73bf"))
  (initrd-modules (cons* "vfio_pci" "vfio" "vfio_iommu_type1" "vfio_virqfd" %base-initrd-modules))

There are two video cards in the system, both AMD, but different models. The video card of interest is in a separate IOMMU group and the <vendor id>:<device id> combination is correct for my machine.

Best I can tell, vfio-pci.ids argument is not propagated to the module by initramfs. See the following:

Searching online I came up against a GitHub issue for a different initramfs generator that exhibited the same symptoms: VFIO module was loaded, kernel arguments were correct, yet the card was not captured by the vfio driver. The maintainer there did a great job tracking down and fixing the issue and came up with this insight https://github.com/anatol/booster/issues/20#issuecomment-808956316

After reading kmod code I found that kernel does not use cmdline params for loadable modules. It was surprising for me. Instead it is expected that userspace handles cmdline parsing and provides required module params explicitly.

Another way to attach the correct driver to the gpu is to run a script at initrd, which I don't know how to accomplish with Guix. This approach has the advantage of working with two identical video cards (or disks, etc) See https://wiki.archlinux.org/title/PCI_passthrough_via_OVMF#Using_identical_guest_and_host_GPUs

I tried following the kernel docs to rebind a different driver after boot, but I believe this doesn't work for video cards, and hasn't worked for me.

Any help is greatly appreciated!

Kernel docs for vfio

Arch guide for GPU passthrough

Thank you!


reply via email to

[Prev in Thread] Current Thread [Next in Thread]