[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
bug#61555: Failed install : installer-dump-8deefb3d
From: |
Ludovic Courtès |
Subject: |
bug#61555: Failed install : installer-dump-8deefb3d |
Date: |
Fri, 24 Feb 2023 12:09:31 +0100 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/28.2 (gnu/linux) |
Hi Paul,
"Paul Connelly (Student)" <prc59@ou.ac.uk> skribis:
> Just trying to install Guix as a standalone OS , core i5 4460, on SSD,
> graphics intel 460. I have submitted installer-dump-8deefb3d. I hope it
> helps.
It’s perfect, thank you for reporting the problem.
The system log in that dump shows that ‘guix system init’ ended up
building Rust and gnome-system-monitor (instead of downloading pre-built
binaries), and it failed to build Rust, which is one of these
dependencies:
--8<---------------cut here---------------start------------->8---
Feb 16 17:28:45 localhost vmunix: [ 0.000000] Linux version 6.0.10-gnu
(guix@guix) (gcc (GCC) 10.3.0, GNU ld (GNU Binutils) 2.37) #1 SMP
PREEMPT_DYNAMIC 1
[…]
Feb 16 17:33:51 localhost installer[381]: running command ("guix" "system"
"init" "--fallback" "/mnt/etc/config.scm" "/mnt")
Feb 16 17:34:04 localhost installer[381]: substitute:
Feb 16 17:34:07 localhost installer[381]: substitute: ^[[Kupdating substitutes
from 'https://ci.guix.gnu.org'... 0.0%
Feb 16 17:34:07 localhost installer[381]: substitute: ^[[Kupdating substitutes
from 'https://ci.guix.gnu.org'... 0.3%
Feb 16 17:34:07 localhost installer[381]: substitute: ^[[Kupdating substitutes
from 'https://ci.guix.gnu.org'... 0.6%
[…]
Feb 16 17:34:10 localhost installer[381]: substitute: ^[[Kupdating substitutes
from 'https://bordeaux.guix.gnu.org'... 98.9%
Feb 16 17:34:10 localhost installer[381]: substitute: ^[[Kupdating substitutes
from 'https://bordeaux.guix.gnu.org'... 100.0%
Feb 16 17:34:10 localhost installer[381]:
Feb 16 17:34:11 localhost installer[381]: ^[[1m27.1 MB will be downloaded
[…]
Feb 16 17:36:13 localhost installer[381]: substitute: ^[[Kupdating substitutes
from 'https://ci.guix.gnu.org'... 91.9%
Feb 16 17:36:13 localhost last message repeated 2 times
[…]
Feb 16 17:36:34 localhost installer[381]: substitute: ^[[Kupdating substitutes
from 'https://bordeaux.guix.gnu.org'... 100.0%
Feb 16 17:36:34 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]: ^[[1;35mThe following derivations
will be built:
Feb 16 17:36:38 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]: ^[[0m
^[[2m/gnu/store/d7y2ws6khc3vwxig10ransz2rjm2r4rn-^[[0mgnome-system-monitor-42.0.drv
Feb 16 17:36:38 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]:
^[[2m/gnu/store/9c6piv330wp9ph7df68n80ig0f8zj99n-^[[0mlibrsvg-2.50.7.drv
Feb 16 17:36:38 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]:
^[[2m/gnu/store/ndd85agyp1r75q98ljmjy7nvys4m7gpa-^[[0mrust-1.60.0.drv
Feb 16 17:36:38 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]:
^[[2m/gnu/store/64q9r8mq6ak4jpriswq61g3n6cdhd1mk-^[[0mrust-1.59.0.drv
Feb 16 17:36:38 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]:
^[[2m/gnu/store/ik7ifm27ypaab1c2q7amawc6cwap3is3-^[[0mrust-1.58.1.drv
Feb 16 17:36:38 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]:
^[[2m/gnu/store/5c88c47v73imc88gqhn8b9bls75f27dq-^[[0mrust-1.57.0.drv
Feb 16 17:36:38 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]:
^[[2m/gnu/store/f8a0l2ivqsascss7g1zabq3bizn1g7va-^[[0mrust-1.56.1.drv
Feb 16 17:36:38 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]:
^[[2m/gnu/store/5gghj8m2ppnwk9nj7fx1a53fri2qg17g-^[[0mrust-1.55.0.drv
Feb 16 17:36:38 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]:
^[[2m/gnu/store/lh7ra87mjhbr14rr6scm3yiyc0i5sps9-^[[0mrust-1.54.0.drv
Feb 16 17:36:38 localhost installer[381]:
Feb 16 17:36:38 localhost installer[381]:
^[[2m/gnu/store/f4x2s9g8gcdcjjcrbj810qmpnydy3yrp-^[[0mgnome-control-center-42.4.drv
[…]
Feb 16 17:45:09 localhost installer[381]: ^[[Kbuilding
/gnu/store/lh7ra87mjhbr14rr6scm3yiyc0i5sps9-rust-1.54.0.drv...
[…]
Feb 16 18:50:22 localhost installer[25727]: ^[[K- 'build' phase
Feb 16 18:50:24 localhost installer[25727]: ^[[K\ 'build' phasebuilder for
`/gnu/store/lh7ra87mjhbr14rr6scm3yiyc0i5sps9-rust-1.54.0.drv' failed with exit
code 1
Feb 16 18:50:24 localhost installer[25727]:
Feb 16 18:50:24 localhost installer[25727]:
Feb 16 18:50:24 localhost installer[25727]: ^[[K^[[31;1mbuild of
/gnu/store/lh7ra87mjhbr14rr6scm3yiyc0i5sps9-rust-1.54.0.drv failed^[[0m
Feb 16 18:50:24 localhost installer[25727]:
Feb 16 18:50:24 localhost installer[25727]: ^[[1mView build log at
'/var/log/guix/drvs/lh/7ra87mjhbr14rr6scm3yiyc0i5sps9-rust-1.54.0.drv.gz'.^[[0m
--8<---------------cut here---------------end--------------->8---
It’s not entirely clear why this happened.
Could it me that network connection was lost, perhaps temporarily,
during the installation, around 17:36?
That could have led Guix to think that pre-built binaries for these were
unavailable.
Substitutes seem to be available for these:
--8<---------------cut here---------------start------------->8---
$ guix time-machine --commit=v1.4.0 -- weather rust librsvg
gnome-control-center
computing 3 package derivations for x86_64-linux...
looking for 7 store items on https://ci.guix.gnu.org...
https://ci.guix.gnu.org ☀
100.0% substitutes available (7 out of 7)
at least 148.2 MiB of nars (compressed)
266.7 MiB on disk (uncompressed)
230 queued builds
aarch64-linux: 228 (99.1%)
x86_64-linux: 2 (.9%)
build rate: 300.33 builds per hour
i686-linux: 116.42 builds per hour
powerpc64le-linux: 45.46 builds per hour
x86_64-linux: 114.42 builds per hour
aarch64-linux: 34.92 builds per hour
looking for 7 store items on https://bordeaux.guix.gnu.org...
https://bordeaux.guix.gnu.org ☀
85.7% substitutes available (6 out of 7)
at least 119.4 MiB of nars (compressed)
246.2 MiB on disk (uncompressed)
0.145 seconds per request (0.1 seconds in total)
6.9 requests per second
(continuous integration information unavailable)
--8<---------------cut here---------------end--------------->8---
But what’s surprising is that I get different derivations that those
shown above (on x86_64):
--8<---------------cut here---------------start------------->8---
$ guix time-machine --commit=v1.4.0 -- build gnome-control-center librsvg rust
-d --no-grafts
/gnu/store/nnmrz365bw5raskqwxqakzjgw224bavg-rust-1.60.0.drv
/gnu/store/v71i2q3vh8iw1xajn22v22v1gc055adg-librsvg-2.50.7.drv
/gnu/store/c9kbrp4xp352ak4nm8qlpph9m9zwhd0b-gnome-control-center-42.4.drv
$ guix time-machine --commit=v1.4.0 -- build gnome-control-center librsvg rust
-d
/gnu/store/a0hsfaiapqsik5sk9l8r84lpm6q0bwpn-rust-1.60.0.drv
/gnu/store/is55baphng1kxgs8nxy6ga81z2rggidn-librsvg-2.50.7.drv
/gnu/store/01iaswvsfdvx1rq6yjgsj98rg1q0r0zs-gnome-control-center-42.4.drv
--8<---------------cut here---------------end--------------->8---
But then, I see this warning:
--8<---------------cut here---------------start------------->8---
Feb 16 17:28:45 localhost vmunix: [ 0.624074]
************************************************************
Feb 16 17:28:45 localhost vmunix: [ 0.624075] ** WARNING! WARNING! WARNING!
WARNING! WARNING! WARNING! **
Feb 16 17:28:45 localhost vmunix: [ 0.624075] **
**
Feb 16 17:28:45 localhost vmunix: [ 0.624076] ** You are using 32-bit PTI on
a 64-bit PCID-capable CPU. **
Feb 16 17:28:45 localhost vmunix: [ 0.624076] ** Your performance will
increase dramatically if you **
Feb 16 17:28:45 localhost vmunix: [ 0.624077] ** switch to a 64-bit kernel!
**
Feb 16 17:28:45 localhost vmunix: [ 0.624077] **
**
Feb 16 17:28:45 localhost vmunix: [ 0.624078] ** WARNING! WARNING! WARNING!
WARNING! WARNING! WARNING! **
Feb 16 17:28:45 localhost vmunix: [ 0.624078]
************************************************************
--8<---------------cut here---------------end--------------->8---
And indeed, it seems you’re actually building for i686 (32-bit) instead
of x86_64 (64-bit):
--8<---------------cut here---------------start------------->8---
$ guix time-machine --commit=v1.4.0 -- build gnome-control-center librsvg rust
-d --no-grafts -s i686-linux
gnu/packages/rust.scm:653:4: warning: package rust@1.60.0 does not support
i686-linux
gnu/packages/gnome.scm:3504:2: warning: package librsvg@2.50.7 does not support
i686-linux
gnu/packages/gnome.scm:9143:2: warning: package gnome-control-center@42.4 does
not support i686-linux
/gnu/store/ndd85agyp1r75q98ljmjy7nvys4m7gpa-rust-1.60.0.drv
/gnu/store/7zi5xdxvnzrccb5nk23zbd10rkxkl9cc-librsvg-2.50.7.drv
/gnu/store/z9q5dgj9alcykkxjfyp4s1pfj5rsbrg7-gnome-control-center-42.4.drv
--8<---------------cut here---------------end--------------->8---
So in short, it looks like you picked the i686 installation image, when
in fact you should have taken the x86_64 image at
<https://guix.gnu.org/download>.
Can you confirm that this is the case?
Thanks,
Ludo’.