|
From: | Roland McGrath |
Subject: | Re: oskit-mach: net access causes crash |
Date: | Thu, 16 Aug 2001 20:07:17 -0400 (EDT) |
Use "set remotedebug 1" in gdb before you start. It should then show you everything it sends and receives on the serial line. You can see if there is something else coming out on the serial line confusing gdb. Are you using one serial port or two? I always recommend using one serial port for the serial console and the other port for gdb.
[Prev in Thread] | Current Thread | [Next in Thread] |