[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: hangs with (hd0,2)/hurd/ext2fs.static
From: |
Shakthi Kannan |
Subject: |
Re: hangs with (hd0,2)/hurd/ext2fs.static |
Date: |
Tue, 8 Feb 2005 00:24:56 -0800 (PST) |
Hi,
Thanks for your reply Patrick Strasser.
--- Patrick Strasser <patrick.strasser@tugraz.at>
wrote:
> > Partition check (DOS partitions):
> > hd0: hd0: status timeout: status=0xff { Busy }
> > hd1: disabled DMA
> > hd0: drive not ready for command
>
> Tell us more about your IDE configuration:
> Do you have some other drive on ide channel 1 (some
> /dev/hda in Linux)?
Actually, the system is an old desktop (500 MHz, 128
MB RAM). It has VIA IDE controller. I had my hard disk
as primary slave, and detected as /dev/hdb. On bootup
I get primary hard disk fail, but, I press F1 to
continue. I actually have lilo installed to the hard
disk (Knoppix 3.6 installed to hard disk). I am using
this system as a GNU/Linux router.
I shall try the new grub boot images.
Installation was pretty easy (5 minutes using K8
mini-iso CD) on my IBM T41, and that is what I intend
to use for development.
Thanks,
K Shakthi
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
- hangs with (hd0,2)/hurd/ext2fs.static, Shakthi Kannan, 2005/02/05
- Re: hangs with (hd0,2)/hurd/ext2fs.static, Marco Gerards, 2005/02/05
- Re: hangs with (hd0,2)/hurd/ext2fs.static, Patrick Strasser, 2005/02/07
- Re: hangs with (hd0,2)/hurd/ext2fs.static,
Shakthi Kannan <=