[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Commit-gnuradio] r3819 - usrp-hw/trunk/sym/generated
|
From: |
matt |
|
Subject: |
[Commit-gnuradio] r3819 - usrp-hw/trunk/sym/generated |
|
Date: |
Wed, 18 Oct 2006 19:32:24 -0600 (MDT) |
Author: matt
Date: 2006-10-18 19:32:23 -0600 (Wed, 18 Oct 2006)
New Revision: 3819
Added:
usrp-hw/trunk/sym/generated/tlk2XX1-PWR.src
usrp-hw/trunk/sym/generated/tlk2XX1-RX.src
usrp-hw/trunk/sym/generated/tlk2XX1-TX.src
Modified:
usrp-hw/trunk/sym/generated/Makefile
Log:
SERDES
Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile 2006-10-18 02:07:49 UTC (rev
3818)
+++ usrp-hw/trunk/sym/generated/Makefile 2006-10-19 01:32:23 UTC (rev
3819)
@@ -142,9 +142,13 @@
dp83865-MDI.sym \
dp83865-MGT.sym \
dp83865-PWR.sym \
- mictor43-LA.sym
+ mictor43-LA.sym \
+ tlk2XX1-PWR.sym \
+ tlk2XX1-RX.sym \
+ tlk2XX1-TX.sym
+
all : $(SOURCES)
clean :
Added: usrp-hw/trunk/sym/generated/tlk2XX1-PWR.src
===================================================================
--- usrp-hw/trunk/sym/generated/tlk2XX1-PWR.src (rev 0)
+++ usrp-hw/trunk/sym/generated/tlk2XX1-PWR.src 2006-10-19 01:32:23 UTC (rev
3819)
@@ -0,0 +1,73 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=yes
+generate_pinseq=yes
+sym_width=2800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=TLK2XX1-PWR
+device=TLK2XX1
+refdes=U?
+footprint=VQFP64
+description=TI SERDES, TLK2501, 2701, and 2711
+documentation=http://www.ti.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+1 pwr line l VDD
+5 pwr line r GND
+9 pwr line l VDD
+13 pwr line r GND
+18 pwr line r GND
+23 pwr line l VDD
+26 in line b PRBSEN
+27 in line b TESTEN
+28 pwr line r GND
+33 pwr line r GND
+38 pwr line l VDD
+43 pwr line r GND
+48 pwr line l VDD
+52 pwr line r GNDA
+55 pwr line l VDDA
+56 in line b Rref
+57 pwr line l VDDA
+58 pwr line r GNDA
+61 pwr line r GNDA
+65 pwr line r GND_EP
+24 in line b ENABLE
+21 in line b LOOPEN
Added: usrp-hw/trunk/sym/generated/tlk2XX1-RX.src
===================================================================
--- usrp-hw/trunk/sym/generated/tlk2XX1-RX.src (rev 0)
+++ usrp-hw/trunk/sym/generated/tlk2XX1-RX.src 2006-10-19 01:32:23 UTC (rev
3819)
@@ -0,0 +1,73 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=yes
+generate_pinseq=yes
+sym_width=2800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=TLK2XX1-RX
+device=TLK2X01
+refdes=U?
+footprint=VQFP64
+description=TI SERDES, TLK2501, 2701, and 2711
+documentation=http://www.ti.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+25 in line r LCKREFN
+29 out line l RKLSB/RX_ER/PRBS_PASS
+30 out line l RKMSB/RX_DV/LOS
+31 out line l RXD15
+32 out line l RXD14
+34 out line l RXD13
+35 out line l RXD12
+36 out line l RXD11
+37 out line l RXD10
+39 out line l RXD9
+40 out line l RXD8
+41 out clk l RX_CLK
+42 out line l RXD7
+44 out line l RXD6
+45 out line l RXD5
+46 out line l RXD4
+47 out line l RXD3
+49 out line l RXD2
+50 out line l RXD1
+51 out line l RXD0
+53 in dot r \_DINRXN\_
+54 in line r DINRXP
Added: usrp-hw/trunk/sym/generated/tlk2XX1-TX.src
===================================================================
--- usrp-hw/trunk/sym/generated/tlk2XX1-TX.src (rev 0)
+++ usrp-hw/trunk/sym/generated/tlk2XX1-TX.src 2006-10-19 01:32:23 UTC (rev
3819)
@@ -0,0 +1,72 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=yes
+generate_pinseq=yes
+sym_width=2000
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=TLK2XX1-TX
+device=TLK2X01
+refdes=U?
+footprint=VQFP64
+description=TI SERDES, TLK2501, 2701, and 2711
+documentation=http://www.ti.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+2 in line l TXD3
+3 in line l TXD4
+4 in line l TXD5
+6 in line l TXD6
+7 in line l TXD7
+8 in clk l GTX_CLK
+10 in line l TXD8
+11 in line l TXD9
+12 in line l TXD10
+14 in line l TXD11
+15 in line l TXD12
+16 in line l TXD13
+17 in line l TXD14
+19 in line l TXD15
+20 in line l TKMSB/TX_EN
+22 in line l TKLSB/TX_ER
+59 out dot r \_DOUTTXN\_
+60 out line r DOUTTXP
+62 in line l TXD0
+63 in line l TXD1
+64 in line l TXD2
\ No newline at end of file
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Commit-gnuradio] r3819 - usrp-hw/trunk/sym/generated,
matt <=