[Commit-gnuradio] r3892 - usrp-hw/trunk/sym/generated

[matt]

Author: matt
Date: 2006-10-29 14:41:19 -0700 (Sun, 29 Oct 2006)
New Revision: 3892

Added:
   usrp-hw/trunk/sym/generated/lt3510-A.src
   usrp-hw/trunk/sym/generated/lt3510-B.src
Modified:
   usrp-hw/trunk/sym/generated/Makefile
Log:
new power suppply


Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile        2006-10-29 20:13:03 UTC (rev 
3891)
+++ usrp-hw/trunk/sym/generated/Makefile        2006-10-29 21:41:19 UTC (rev 
3892)
@@ -150,7 +150,9 @@
        xc9572xl-vq44-PWR.sym \
        xc9572xl-vq44-IO.sym \
        ad79x2-msop.sym \
-       ad56x4.sym
+       ad56x4.sym \
+       lt3510-A.sym \
+       lt3510-B.sym
 
 
 

Added: usrp-hw/trunk/sym/generated/lt3510-A.src
===================================================================
--- usrp-hw/trunk/sym/generated/lt3510-A.src                            (rev 0)
+++ usrp-hw/trunk/sym/generated/lt3510-A.src    2006-10-29 21:41:19 UTC (rev 
3892)
@@ -0,0 +1,63 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=LT3510-A
+device=LT3510
+refdes=U?
+footprint=TSSOP20
+description=Linear Tech DualAdjustable DC-DC
+documentation=http://www.linear.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Needs a pad in the middle for thermal, Part 1 of 2
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+1              pwr     line    l               Vin1
+20             in      line    t               BST1
+21             pwr     line    b               GND_EP
+2              io      line    r               SW1
+3              io      line    r               IND1
+4              pwr     line    r               Vout1
+5              out     line    l               PG1
+17             in      line    r               FB1
+19             io      line    r               SS/Track1
+18             out     line    l               Vc1
+16             in      line    l               RT/SYNC
+15             in      line    l               SHDN

Added: usrp-hw/trunk/sym/generated/lt3510-B.src
===================================================================
--- usrp-hw/trunk/sym/generated/lt3510-B.src                            (rev 0)
+++ usrp-hw/trunk/sym/generated/lt3510-B.src    2006-10-29 21:41:19 UTC (rev 
3892)
@@ -0,0 +1,61 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=LT3510-B
+device=LT3510
+refdes=U?
+footprint=TSSOP20
+description=Linear Tech DualAdjustable DC-DC
+documentation=http://www.linear.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Needs a pad in the middle for thermal, Part 1 of 2
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+10             pwr     line    l               Vin2
+11             in      line    t               BST2
+21             pwr     line    b               GND_EP
+9              io      line    r               SW2
+8              io      line    r               IND2
+7              pwr     line    r               Vout2
+6              out     line    l               PG2
+14             in      line    r               FB2
+12             io      line    r               SS/Track2
+13             out     line    l               Vc2