[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Hydra job gnu:hurd-master:qemu_tests.parallel_build on x86_64-linux, bu
From: |
Hydra Build Daemon |
Subject: |
Hydra job gnu:hurd-master:qemu_tests.parallel_build on x86_64-linux, build 2778198: Failed with non-zero exit code |
Date: |
Sat, 7 Jul 2012 16:25:47 +0200 |
Hi,
This is to let you know that Hydra build 2778198 of job
gnu:hurd-master:qemu_tests.parallel_build has changed from 'Dependency failed'
to 'Failed with non-zero exit code'.
Complete build information can be found on this page:
http://hydra.nixos.org/build/2778198
The last 50 lines of the build log are shown at the bottom of this email.
A summary of the build information follows:
Build ID: | 2778198
Nix name: | hurd-qemu-test-parallel-build
Short description: | The GNU Hurd, GNU project's replacement for the Unix
kernel
Maintainer(s): | Hurd <address@hidden>, Ludovic Courtès
<address@hidden>
System: | x86_64-linux
Derivation store path: |
/nix/store/cshwwkwnskysz0xgp1jmf51llrh8kydh-hurd-qemu-test-parallel-build.drv
Output store path: |
/nix/store/8s861k0cykdlr188w5j82cm4xrbk8q0m-hurd-qemu-test-parallel-build
Time added: | 2012-07-07 16:25:47
Build started: | 2012-07-07 15:02:54
Build finished: | 2012-07-07 16:25:47
Duration: | 4973s
The build inputs were:
Name | Type | Value
-----------------+-------+--------------------------------------------------------------------------------------
xbuild | build | 2759498
partedTarball | build | 2731469
hydraConfig | git |
git://git.savannah.gnu.org/hydra-recipes.git:cc862db0ab8424f2004f416b4f8aae6460190e22
inetutils | build | 2765867
coreutils | build | 2690543
glibcTarball | build | 2776367
parted | build | 2731467
nixpkgs | git |
git://github.com/NixOS/nixpkgs.git:50d9f2300a0d322370ffa502a6bc14bfc8d66e27
tarball | build | 2759425
guile | build | 2765921
grep | build | 2765628
hurdSrc | git |
git://git.sv.gnu.org/hurd/hurd.git:f16e9d281458a62da986a454522a58d9947bfd76
coreutilsTarball | build | 2765793
machTarball | build | 2772118
mach | build | 2769598
Regards,
The Hydra build daemon.
---
ppa: PS/2 bidirectional port present
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
rtl8139.c:v1.23a 8/24/2003 Donald Becker, address@hidden
http://www.scyld.com/network/rtl8139.html
The PCI BIOS has not enabled the device at 0/24! Updating PCI command 3->
7.
eth0: RealTek RTL8139C+, 64 bit high performance at 0xc000, IRQ 11, 52:54:
0:12:34:56.
PCI latency timer (CFLT) is unreasonably low at 0. Setting to 32 clocks.
via-rhine.c:v1.16 7/22/2003 Written by Donald Becker <address@hidden>
http://www.scyld.com/network/via-rhine.html
0 3c515 cards found.
eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
Partition check (DOS partitions):
hd0: hd0s1
Linux PCMCIA Card Services 3.2.8
kernel build: 2.0.36
options: [pci]
PCI routing table version 1.0 at 0xfd1d0
Intel ISA/PCI/CardBus PCIC probe:
no bridges found.
ds: no socket drivers loaded!
xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
lpr0: at atbus0, port = 378, spl = 6, pic = 7.
module 0: ext2fs --multiboot-command-line=${kernel-command-line}
--host-priv-port=${host-port} --device-master-port=${device-port}
--exec-server-task=${exec-task} -T typed ${root} $(task-create) $(task-resume)
module 1: exec /hurd/exec $(exec-task=task-create)
2 multiboot modules
task loaded: ext2fs
--multiboot-command-line=root=device:hd0s1 console=com0 --host-priv-port=1
--device-master-port=2 --exec-server-task=3 -T typed device:hd0s1
task loaded: exec /hurd/exec
start ext2fs: Hurd server bootstrap: ext2fs[device:hd0s1] exec init proc
auth/libexec/console-run: /dev/console: No such file or directory
swapon: No swap partitions found in /etc/fstab
Automatic boot in progress...
Sat Jul 7 14:25:28 UTC 2012
cleaning up left over files...done
touch: cannot touch `/var/run/mtab': No such file or directory
starting daemons:/libexec/rc: line 109: /sbin/syslogd: No such file or directory
/libexec/rc: line 110: /sbin/inetd: No such file or directory
.
Sat Jul 7 14:25:30 UTC 2012
+ uname -a
GNU nixognu 0.3 GNU-Mach 1.3.99/Hurd-0.3 i686-AT386 GNU
+ ls -la /host/xchg
ls: cannot access /host/xchg: Translator died
+ '[' -f /host/xchg/cmd ']'
+ reboot
init: notifying ext2fs device:hd0s1 of shutdown...init: rebooting Mach (flags
0)...
Virtual machine didn't produce an exit code.
builder for
`/nix/store/cshwwkwnskysz0xgp1jmf51llrh8kydh-hurd-qemu-test-parallel-build.drv'
failed with exit code 1
error: build of
`/nix/store/cshwwkwnskysz0xgp1jmf51llrh8kydh-hurd-qemu-test-parallel-build.drv'
failed
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Hydra job gnu:hurd-master:qemu_tests.parallel_build on x86_64-linux, build 2778198: Failed with non-zero exit code,
Hydra Build Daemon <=