========================================================= GNU coreutils 9.3.156-b3afb: ./tests/test-suite.log ========================================================= # TOTAL: 645 # PASS: 468 # SKIP: 172 # XFAIL: 0 # FAIL: 5 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 FAIL: tests/help/help-version ============================= test: ] missing test: ] missing 0+1 records in 0+1 records out FAIL tests/help/help-version.sh (exit status: 1) SKIP: tests/tail/inotify-race ============================= inotify-race.sh: skipped test: inotify is not supported SKIP tests/tail/inotify-race.sh (exit status: 77) SKIP: tests/tail/inotify-race2 ============================== inotify-race2.sh: skipped test: inotify is not supported SKIP tests/tail/inotify-race2.sh (exit status: 77) SKIP: tests/rm/ext3-perf ======================== ext3-perf.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/rm/ext3-perf.sh (exit status: 77) SKIP: tests/cp/link-heap ======================== link-heap.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/cp/link-heap.sh (exit status: 77) SKIP: tests/cp/no-ctx ===================== ld: 0711-570 WARNING: Symbol table entry 1 in object /tmp/cci4YPxg.o is invalid. Filename in C_FILE auxiliary symbol is null. grep: can't open /proc/filesystems no-ctx.sh: skipped test: this system lacks SELinux support SKIP tests/cp/no-ctx.sh (exit status: 77) SKIP: tests/tty/tty-eof ======================= tty-eof.pl: this script requires Perl's Expect package >=1.11 SKIP tests/tty/tty-eof.pl (exit status: 77) SKIP: tests/misc/read-errors ============================ read-errors.sh: skipped test: Need unreadable directories SKIP tests/misc/read-errors.sh (exit status: 77) SKIP: tests/misc/write-errors ============================= write-errors.sh: skipped test: /dev/full is required SKIP tests/misc/write-errors.sh (exit status: 77) SKIP: tests/tail/inotify-rotate =============================== inotify-rotate.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/tail/inotify-rotate.sh (exit status: 77) SKIP: tests/tail/inotify-rotate-resources ========================================= inotify-rotate-resources.sh: skipped test: inotify required SKIP tests/tail/inotify-rotate-resources.sh (exit status: 77) SKIP: tests/tail/inotify-dir-recreate ===================================== inotify-dir-recreate.sh: skipped test: inotify is not supported SKIP tests/tail/inotify-dir-recreate.sh (exit status: 77) SKIP: tests/tail/inotify-only-regular ===================================== inotify-only-regular.sh: skipped test: inotify support required SKIP tests/tail/inotify-only-regular.sh (exit status: 77) SKIP: tests/chgrp/basic ======================= basic.sh: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running 'id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP tests/chgrp/basic.sh (exit status: 77) SKIP: tests/rm/isatty ===================== isatty.sh: skipped test: there is no /dev/stdin file SKIP tests/rm/isatty.sh (exit status: 77) SKIP: tests/rm/hash =================== hash.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/rm/hash.sh (exit status: 77) SKIP: tests/rm/r-root ===================== ld: 0711-570 WARNING: Symbol table entry 1 in object /tmp/ccCzGq1f.o is invalid. Filename in C_FILE auxiliary symbol is null. r-root.sh: skipped test: can't run gdb SKIP tests/rm/r-root.sh (exit status: 77) SKIP: tests/rm/many-dir-entries-vs-OOM ====================================== many-dir-entries-vs-OOM.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/rm/many-dir-entries-vs-OOM.sh (exit status: 77) SKIP: tests/rm/rm-readdir-fail ============================== ld: 0711-570 WARNING: Symbol table entry 1 in object /tmp/ccWarL6f.o is invalid. Filename in C_FILE auxiliary symbol is null. rm-readdir-fail.sh: skipped test: internal test failure: maybe LD_PRELOAD doesn't work? SKIP tests/rm/rm-readdir-fail.sh (exit status: 77) SKIP: tests/chgrp/default-no-deref ================================== default-no-deref.sh: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running 'id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP tests/chgrp/default-no-deref.sh (exit status: 77) SKIP: tests/chgrp/deref ======================= deref.sh: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running 'id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP tests/chgrp/deref.sh (exit status: 77) SKIP: tests/chgrp/no-x ====================== no-x.sh: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running 'id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP tests/chgrp/no-x.sh (exit status: 77) SKIP: tests/chgrp/posix-H ========================= posix-H.sh: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running 'id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP tests/chgrp/posix-H.sh (exit status: 77) SKIP: tests/chgrp/recurse ========================= recurse.sh: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running 'id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP tests/chgrp/recurse.sh (exit status: 77) SKIP: tests/seq/seq-io-errors ============================= seq-io-errors.sh: skipped test: /dev/full is required SKIP tests/seq/seq-io-errors.sh (exit status: 77) SKIP: tests/seq/seq-long-double =============================== long.c:1:10: fatal error: features.h: No such file or directory 1 | #include | ^~~~~~~~~~~~ compilation terminated. seq-long-double.sh: skipped test: this test runs only on systems with glibc and long double != double SKIP tests/seq/seq-long-double.sh (exit status: 77) SKIP: tests/tail/tail-n0f ========================= tail-n0f.sh: skipped test: /proc/23200118/status: missing or 'different' SKIP tests/tail/tail-n0f.sh (exit status: 77) SKIP: tests/misc/arch ===================== arch: not built arch.sh: skipped test: required program(s) not built SKIP tests/misc/arch.sh (exit status: 77) SKIP: tests/misc/coreutils ========================== coreutils: not built coreutils.sh: skipped test: required program(s) not built SKIP tests/misc/coreutils.sh (exit status: 77) SKIP: tests/cut/cut-huge-range ============================== cut-huge-range.sh: skipped test: this shell lacks ulimit support SKIP tests/cut/cut-huge-range.sh (exit status: 77) SKIP: tests/wc/wc-parallel ========================== wc-parallel.sh: skipped test: xargs -P is required SKIP tests/wc/wc-parallel.sh (exit status: 77) SKIP: tests/cat/cat-proc ======================== cat-proc.sh: skipped test: no /proc/cpuinfo SKIP tests/cat/cat-proc.sh (exit status: 77) SKIP: tests/csplit/csplit-heap ============================== csplit-heap.sh: skipped test: this shell lacks ulimit support SKIP tests/csplit/csplit-heap.sh (exit status: 77) SKIP: tests/csplit/csplit-io-err ================================ ld: 0711-570 WARNING: Symbol table entry 1 in object /tmp/ccI3YKIr.o is invalid. Filename in C_FILE auxiliary symbol is null. csplit-io-err.sh: skipped test: /dev/full is required SKIP tests/csplit/csplit-io-err.sh (exit status: 77) SKIP: tests/expr/expr-multibyte =============================== expr-multibyte.pl: this test requires FR-UTF8 locale SKIP tests/expr/expr-multibyte.pl (exit status: 77) SKIP: tests/head/head-c ======================= head-c.sh: skipped test: this shell lacks ulimit support SKIP tests/head/head-c.sh (exit status: 77) SKIP: tests/head/head-write-error ================================= head-write-error.sh: skipped test: /dev/full is required SKIP tests/head/head-write-error.sh (exit status: 77) SKIP: tests/cksum/md5sum-parallel ================================= md5sum-parallel.sh: skipped test: xargs -P is required SKIP tests/cksum/md5sum-parallel.sh (exit status: 77) SKIP: tests/printf/printf-surprise ================================== printf-surprise.sh: skipped test: this shell lacks ulimit support SKIP tests/printf/printf-surprise.sh (exit status: 77) SKIP: tests/runcon/runcon-compute ================================= runcon: runcon may be used only on a SELinux kernel runcon-compute.sh: skipped test: runcon setup failed SKIP tests/runcon/runcon-compute.sh (exit status: 77) SKIP: tests/shuf/shuf-reservoir =============================== shuf-reservoir.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/shuf/shuf-reservoir.sh (exit status: 77) SKIP: tests/sort/sort-benchmark-random ====================================== sort-benchmark-random.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/sort/sort-benchmark-random.sh (exit status: 77) SKIP: tests/sort/sort-compress-hang =================================== sort-compress-hang.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/sort/sort-compress-hang.sh (exit status: 77) SKIP: tests/sort/sort-compress-proc =================================== sort-compress-proc.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/sort/sort-compress-proc.sh (exit status: 77) FAIL: tests/sort/sort-continue ============================== sort: open failed: __test.10: Too many open files file descriptor exhaustion not handled sort: open failed: __test.10: Too many open files stdin not handled properly FAIL tests/sort/sort-continue.sh (exit status: 1) SKIP: tests/sort/sort-h-thousands-sep ===================================== sort-h-thousands-sep.sh: skipped test: The Swedish locale with blank thousands separator is unavailable. SKIP tests/sort/sort-h-thousands-sep.sh (exit status: 77) SKIP: tests/sort/sort-month =========================== sort-month.sh: skipped test: The locale utility is not present SKIP tests/sort/sort-month.sh (exit status: 77) SKIP: tests/sort/sort-spinlock-abuse ==================================== sort-spinlock-abuse.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/sort/sort-spinlock-abuse.sh (exit status: 77) SKIP: tests/sort/sort-stale-thread-mem ====================================== sort-stale-thread-mem.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/sort/sort-stale-thread-mem.sh (exit status: 77) SKIP: tests/sort/sort-u-FMR =========================== sort-u-FMR.sh: skipped test: requires a working valgrind SKIP tests/sort/sort-u-FMR.sh (exit status: 77) SKIP: tests/split/filter ======================== ../tests/split/filter.sh[22]: xz: not found filter.sh: skipped test: xz required SKIP tests/split/filter.sh (exit status: 77) SKIP: tests/split/line-bytes ============================ line-bytes.sh: skipped test: this shell lacks ulimit support SKIP tests/split/line-bytes.sh (exit status: 77) FAIL: tests/misc/stdbuf ======================= stdbuf: invalid mode 'l' stdbuf: invalid mode '18446744073709551616': Value too large to be stored in data type stdbuf: line buffering stdin is meaningless Try 'stdbuf --help' for more information. stdbuf: you must specify a buffering mode option Try 'stdbuf --help' for more information. env: '.': Permission denied stdbuf: failed to run command '.': Permission denied stdbuf: failed to run command 'no_such': No such file or directory --- exp 2023-08-28 11:00:56.897039350 +0000 +++ out 2023-08-28 11:00:56.205589697 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:00:56.225519112 +0000 +++ out 2023-08-28 11:00:56.439915744 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:00:56.459919873 +0000 +++ out 2023-08-28 11:00:56.875530978 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:00:56.895529505 +0000 +++ out 2023-08-28 11:00:57.710425027 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:00:57.730428933 +0000 +++ out 2023-08-28 11:00:59.341054330 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:00:59.365570460 +0000 +++ out 2023-08-28 11:01:02.575619125 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:01:02.595695788 +0000 +++ out 2023-08-28 11:01:02.715617728 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:01:02.735618360 +0000 +++ out 2023-08-28 11:01:02.955623929 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:01:02.982582781 +0000 +++ out 2023-08-28 11:01:03.395652515 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:01:03.415663936 +0000 +++ out 2023-08-28 11:01:04.228679001 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:01:04.246134620 +0000 +++ out 2023-08-28 11:01:05.865705974 +0000 @@ -1,1 +1,2 @@ 1 +2 --- exp 2023-08-28 11:01:05.885682792 +0000 +++ out 2023-08-28 11:01:09.980457550 +0000 @@ -1,1 +1,2 @@ 1 +2 FAIL tests/misc/stdbuf.sh (exit status: 1) SKIP: tests/stty/stty ===================== stty.sh: skipped test: no strace program SKIP tests/stty/stty.sh (exit status: 77) SKIP: tests/stty/stty-pairs =========================== stty-pairs.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/stty/stty-pairs.sh (exit status: 77) SKIP: tests/tac/tac-continue ============================ tac-continue.sh: skipped test: FULL_PARTITION_TMPDIR not defined SKIP tests/tac/tac-continue.sh (exit status: 77) SKIP: tests/timeout/timeout-group ================================= ../tests/timeout/timeout-group.sh[33]: setsid: not found timeout-group.sh: skipped test: setsid required to control groups SKIP tests/timeout/timeout-group.sh (exit status: 77) SKIP: tests/misc/xattr ====================== cp: cannot preserve extended attributes, cp is built without xattr support xattr.sh: skipped test: coreutils built without xattr support SKIP tests/misc/xattr.sh (exit status: 77) SKIP: tests/chown/separator =========================== ../tests/chown/separator.sh[36]: getent: not found ../tests/chown/separator.sh[37]: getent: not found separator.sh: skipped test: group 'usr' not biunique: SKIP tests/chown/separator.sh (exit status: 77) SKIP: tests/cp/acl ================== acl.sh: skipped test: This test requires getfacl and setfacl. SKIP tests/cp/acl.sh (exit status: 77) SKIP: tests/cp/existing-perm-race ================================= existing-perm-race.sh: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running 'id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP tests/cp/existing-perm-race.sh (exit status: 77) SKIP: tests/cp/sparse-extents ============================= sparse-extents.sh: skipped test: insufficient SEEK_DATA support SKIP tests/cp/sparse-extents.sh (exit status: 77) SKIP: tests/cp/copy-FMR ======================= copy-FMR.sh: skipped test: requires a working valgrind SKIP tests/cp/copy-FMR.sh (exit status: 77) SKIP: tests/cp/sparse-perf ========================== sparse-perf.sh: skipped test: insufficient SEEK_DATA support SKIP tests/cp/sparse-perf.sh (exit status: 77) SKIP: tests/cp/sparse-2 ======================= sparse-2.sh: skipped test: insufficient SEEK_DATA support SKIP tests/cp/sparse-2.sh (exit status: 77) SKIP: tests/cp/nfs-removal-race =============================== ld: 0711-570 WARNING: Symbol table entry 1 in object /tmp/ccY52eWb.o is invalid. Filename in C_FILE auxiliary symbol is null. nfs-removal-race.sh: skipped test: LD_PRELOAD was ineffective? SKIP tests/cp/nfs-removal-race.sh (exit status: 77) SKIP: tests/cp/perm =================== perm.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/cp/perm.sh (exit status: 77) SKIP: tests/cp/proc-short-read ============================== proc-short-read.sh: skipped test: your system lacks /proc/cpuinfo SKIP tests/cp/proc-short-read.sh (exit status: 77) SKIP: tests/df/no-mtab-status ============================= ld: 0711-570 WARNING: Symbol table entry 1 in object /tmp/ccsaMtal.o is invalid. Filename in C_FILE auxiliary symbol is null. Filesystem 1K-blocks Used Available Use% Mounted on /dev/hd4 2097152 178996 1918156 9% / /dev/hd2 3080192 2818488 261704 92% /usr /dev/hd9var 2883584 1409696 1473888 49% /var /dev/hd3 2883584 277052 2606532 10% /tmp /dev/hd1 65536 384 65152 1% /homehd1 /dev/hd11admin 131072 380 130692 1% /admin /ahafs - - 0 - /aha /dev/hd10opt 4194304 3631364 562940 87% /opt /dev/livedump 262144 368 261776 1% /var/adm/ras/livedump /dev/lvscratch 66912256 887144 66025112 2% /scratch /dev/hd01 440401920 419634136 20767784 96% /home Filesystem 1K-blocks Used Available Use% Mounted on /dev/hd4 2097152 178996 1918156 9% / /dev/hd2 3080192 2818488 261704 92% /usr /dev/hd9var 2883584 1409696 1473888 49% /var /dev/hd3 2883584 277076 2606508 10% /tmp /dev/hd1 65536 384 65152 1% /homehd1 /dev/hd11admin 131072 380 130692 1% /admin /ahafs - - 0 - /aha /dev/hd10opt 4194304 3631364 562940 87% /opt /dev/livedump 262144 368 261776 1% /var/adm/ras/livedump /dev/lvscratch 66912256 887144 66025112 2% /scratch /dev/hd01 440401920 419634152 20767768 96% /home no-mtab-status.sh: skipped test: internal test failure: maybe LD_PRELOAD doesn't work? SKIP tests/df/no-mtab-status.sh (exit status: 77) SKIP: tests/df/skip-duplicates ============================== ld: 0711-570 WARNING: Symbol table entry 1 in object /tmp/cci4VGVM.o is invalid. Filename in C_FILE auxiliary symbol is null. / Filesystem 1K-blocks Used Available Use% Mounted on /dev/hd4 2097152 178996 1918156 9% / /dev/hd2 3080192 2818488 261704 92% /usr /dev/hd9var 2883584 1409696 1473888 49% /var /dev/hd3 2883584 277124 2606460 10% /tmp /dev/hd1 65536 384 65152 1% /homehd1 /dev/hd11admin 131072 380 130692 1% /admin /ahafs - - 0 - /aha /dev/hd10opt 4194304 3631364 562940 87% /opt /dev/livedump 262144 368 261776 1% /var/adm/ras/livedump /dev/lvscratch 66912256 887144 66025112 2% /scratch /dev/hd01 440401920 419634164 20767756 96% /home skip-duplicates.sh: skipped test: internal test failure: maybe LD_PRELOAD doesn't work? SKIP tests/df/skip-duplicates.sh (exit status: 77) SKIP: tests/df/skip-rootfs ========================== Filesystem 1K-blocks Used Available Use% Mounted on /dev/hd4 2097152 178996 1918156 9% / /dev/hd2 3080192 2818488 261704 92% /usr /dev/hd9var 2883584 1409696 1473888 49% /var /dev/hd3 2883584 277124 2606460 10% /tmp /dev/hd1 65536 384 65152 1% /homehd1 /dev/hd11admin 131072 380 130692 1% /admin /ahafs - - 0 - /aha /dev/hd10opt 4194304 3631364 562940 87% /opt /dev/livedump 262144 368 261776 1% /var/adm/ras/livedump /dev/lvscratch 66912256 887144 66025112 2% /scratch /dev/hd01 440401920 419634148 20767772 96% /home skip-rootfs.sh: skipped test: no rootfs in mtab SKIP tests/df/skip-rootfs.sh (exit status: 77) SKIP: tests/dd/no-allocate ========================== no-allocate.sh: skipped test: this shell lacks ulimit support SKIP tests/dd/no-allocate.sh (exit status: 77) SKIP: tests/dd/nocache_eof ========================== nocache_eof.sh: skipped test: no strace program SKIP tests/dd/nocache_eof.sh (exit status: 77) SKIP: tests/du/2g ================= 2g.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/du/2g.sh (exit status: 77) SKIP: tests/du/fd-leak ====================== fd-leak.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/du/fd-leak.sh (exit status: 77) SKIP: tests/du/files0-from-dir ============================== files0-from-dir.sh: skipped test: cat dir/ succeeds SKIP tests/du/files0-from-dir.sh (exit status: 77) SKIP: tests/du/long-from-unreadable =================================== long-from-unreadable.sh: skipped test: This test would fail, since your system lacks /proc support. SKIP tests/du/long-from-unreadable.sh (exit status: 77) SKIP: tests/du/move-dir-while-traversing ======================================== ../tests/du/move-dir-while-traversing.sh[24]: python: not found move-dir-while-traversing.sh: skipped test: python inotify package not installed SKIP tests/du/move-dir-while-traversing.sh (exit status: 77) SKIP: tests/du/threshold ======================== threshold.sh: skipped test: block size of a directory is smaller than 4 bytes SKIP tests/du/threshold.sh (exit status: 77) SKIP: tests/id/gnu-zero-uids ============================ gnu-zero-uids.sh: skipped test: not running on GNU/Hurd SKIP tests/id/gnu-zero-uids.sh (exit status: 77) SKIP: tests/id/no-context ========================= grep: can't open /proc/filesystems no-context.sh: skipped test: this system lacks SELinux support SKIP tests/id/no-context.sh (exit status: 77) SKIP: tests/id/context ====================== grep: can't open /proc/filesystems context.sh: skipped test: this system lacks SELinux support SKIP tests/id/context.sh (exit status: 77) SKIP: tests/id/smack ==================== grep: can't open /proc/filesystems smack.sh: skipped test: this system lacks SMACK support SKIP tests/id/smack.sh (exit status: 77) FAIL: tests/install/basic-1 =========================== strip: dd2 -- 0654-423 dd2 is not valid in the current object file mode. Use the -X option to specify the desired object mode. WARNING!!! Your strip command doesn't seem to work, so skipping the test of install's --strip option. ginstall: cannot create directory 'rel': Permission denied FAIL tests/install/basic-1.sh (exit status: 1) SKIP: tests/install/install-C-selinux ===================================== grep: can't open /proc/filesystems install-C-selinux.sh: skipped test: this system lacks SELinux support SKIP tests/install/install-C-selinux.sh (exit status: 77) SKIP: tests/install/install-Z-selinux ===================================== grep: can't open /proc/filesystems install-Z-selinux.sh: skipped test: this system lacks SELinux support SKIP tests/install/install-Z-selinux.sh (exit status: 77) SKIP: tests/ls/getxattr-speedup =============================== ld: 0711-570 WARNING: Symbol table entry 1 in object /tmp/ccGFhJ6D.o is invalid. Filename in C_FILE auxiliary symbol is null. total 12 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 1 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 10 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 11 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 12 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 13 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 14 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 15 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 16 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 17 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 18 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 19 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 2 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 20 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 3 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 4 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 5 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 6 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 7 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 8 -rw-r--r-- 1 haible usr 0 Aug 28 11:06 9 -rw-r--r-- 1 haible usr 528 Aug 28 11:06 k.c -rwxr-xr-x 1 haible usr 7567 Aug 28 11:06 k.so getxattr-speedup.sh: skipped test: internal test failure: maybe LD_PRELOAD doesn't work? SKIP tests/ls/getxattr-speedup.sh (exit status: 77) SKIP: tests/ls/no-cap ===================== no-cap.sh: skipped test: no strace program SKIP tests/ls/no-cap.sh (exit status: 77) SKIP: tests/ls/removed-directory ================================ rmdir: failed to remove '../d': Device busy removed-directory.sh: skipped test: can't remove working directory on this platform SKIP tests/ls/removed-directory.sh (exit status: 77) SKIP: tests/ls/root-rel-symlink-color ===================================== root-rel-symlink-color.sh: skipped test: no relative symlink in / SKIP tests/ls/root-rel-symlink-color.sh (exit status: 77) SKIP: tests/ls/slink-acl ======================== ../tests/ls/slink-acl.sh[19]: setfacl: not found slink-acl.sh: skipped test: setfacl does not work on the current file system SKIP tests/ls/slink-acl.sh (exit status: 77) SKIP: tests/ls/stat-dtype ========================= stat-dtype.sh: skipped test: '.' is not on a suitable file system for this test SKIP tests/ls/stat-dtype.sh (exit status: 77) SKIP: tests/ls/stat-free-color ============================== stat-free-color.sh: skipped test: no strace program SKIP tests/ls/stat-free-color.sh (exit status: 77) SKIP: tests/ls/stat-free-symlinks ================================= stat-free-symlinks.sh: skipped test: no strace program SKIP tests/ls/stat-free-symlinks.sh (exit status: 77) FAIL: tests/mkdir/p-3 ===================== mkdir: cannot create directory 'a': Permission denied mkdir: cannot create directory 'd': Permission denied FAIL tests/mkdir/p-3.sh (exit status: 1) SKIP: tests/mkdir/p-acl ======================= ../tests/mkdir/p-acl.sh[19]: setfacl: not found p-acl.sh: skipped test: setfacl does not work on the current file system SKIP tests/mkdir/p-acl.sh (exit status: 77) SKIP: tests/mkdir/selinux ========================= grep: can't open /proc/filesystems selinux.sh: skipped test: this system lacks SELinux support SKIP tests/mkdir/selinux.sh (exit status: 77) SKIP: tests/mkdir/restorecon ============================ grep: can't open /proc/filesystems restorecon.sh: skipped test: this system lacks SELinux support SKIP tests/mkdir/restorecon.sh (exit status: 77) SKIP: tests/mkdir/smack-no-root =============================== grep: can't open /proc/filesystems smack-no-root.sh: skipped test: this system lacks SMACK support SKIP tests/mkdir/smack-no-root.sh (exit status: 77) SKIP: tests/mv/acl ================== acl.sh: skipped test: This test requires getfacl and setfacl. SKIP tests/mv/acl.sh (exit status: 77) SKIP: tests/mv/atomic ===================== atomic.sh: skipped test: no strace program SKIP tests/mv/atomic.sh (exit status: 77) SKIP: tests/mv/atomic2 ====================== atomic2.sh: skipped test: no strace program SKIP tests/mv/atomic2.sh (exit status: 77) SKIP: tests/mv/i-3 ================== i-3.sh: skipped test: there is no /dev/stdin file SKIP tests/mv/i-3.sh (exit status: 77) SKIP: tests/mv/leak-fd ====================== leak-fd.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/mv/leak-fd.sh (exit status: 77) SKIP: tests/mv/symlink-onto-hardlink-to-self ============================================ symlink-onto-hardlink-to-self.sh: skipped test: your kernel or file system cannot create a hard link to a symlink SKIP tests/mv/symlink-onto-hardlink-to-self.sh (exit status: 77) SKIP: tests/tail/big-4gb ======================== big-4gb.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/tail/big-4gb.sh (exit status: 77) SKIP: tests/chown/basic ======================= basic.sh: skipped test: must be run as root SKIP tests/chown/basic.sh (exit status: 77) SKIP: tests/cp/cp-a-selinux =========================== cp-a-selinux.sh: skipped test: must be run as root SKIP tests/cp/cp-a-selinux.sh (exit status: 77) SKIP: tests/cp/preserve-gid =========================== preserve-gid.sh: skipped test: must be run as root SKIP tests/cp/preserve-gid.sh (exit status: 77) SKIP: tests/cp/special-bits =========================== special-bits.sh: skipped test: must be run as root SKIP tests/cp/special-bits.sh (exit status: 77) SKIP: tests/cp/cp-mv-enotsup-xattr ================================== cp-mv-enotsup-xattr.sh: skipped test: must be run as root SKIP tests/cp/cp-mv-enotsup-xattr.sh (exit status: 77) SKIP: tests/cp/capability ========================= capability.sh: skipped test: must be run as root SKIP tests/cp/capability.sh (exit status: 77) SKIP: tests/cp/sparse-extents-2 =============================== sparse-extents-2.sh: skipped test: insufficient SEEK_DATA support SKIP tests/cp/sparse-extents-2.sh (exit status: 77) SKIP: tests/cp/cross-dev-symlink ================================ cross-dev-symlink.sh: skipped test: must be run as root SKIP tests/cp/cross-dev-symlink.sh (exit status: 77) SKIP: tests/dd/skip-seek-past-dev ================================= skip-seek-past-dev.sh: skipped test: must be run as root SKIP tests/dd/skip-seek-past-dev.sh (exit status: 77) SKIP: tests/df/problematic-chars ================================ problematic-chars.sh: skipped test: must be run as root SKIP tests/df/problematic-chars.sh (exit status: 77) SKIP: tests/df/over-mount-device ================================ over-mount-device.sh: skipped test: must be run as root SKIP tests/df/over-mount-device.sh (exit status: 77) SKIP: tests/du/bind-mount-dir-cycle =================================== bind-mount-dir-cycle.sh: skipped test: must be run as root SKIP tests/du/bind-mount-dir-cycle.sh (exit status: 77) SKIP: tests/du/bind-mount-dir-cycle-v2 ====================================== bind-mount-dir-cycle-v2.sh: skipped test: must be run as root SKIP tests/du/bind-mount-dir-cycle-v2.sh (exit status: 77) SKIP: tests/id/setgid ===================== setgid.sh: skipped test: must be run as root SKIP tests/id/setgid.sh (exit status: 77) SKIP: tests/install/install-C-root ================================== install-C-root.sh: skipped test: must be run as root SKIP tests/install/install-C-root.sh (exit status: 77) SKIP: tests/ls/capability ========================= capability.sh: skipped test: must be run as root SKIP tests/ls/capability.sh (exit status: 77) SKIP: tests/ls/nameless-uid =========================== nameless-uid.sh: skipped test: must be run as root SKIP tests/ls/nameless-uid.sh (exit status: 77) SKIP: tests/chcon/chcon ======================= chcon.sh: skipped test: must be run as root SKIP tests/chcon/chcon.sh (exit status: 77) SKIP: tests/chroot/chroot-credentials ===================================== chroot-credentials.sh: skipped test: must be run as root SKIP tests/chroot/chroot-credentials.sh (exit status: 77) SKIP: tests/misc/selinux ======================== selinux.sh: skipped test: must be run as root SKIP tests/misc/selinux.sh (exit status: 77) SKIP: tests/truncate/truncate-owned-by-other ============================================ truncate-owned-by-other.sh: skipped test: must be run as root SKIP tests/truncate/truncate-owned-by-other.sh (exit status: 77) SKIP: tests/mkdir/writable-under-readonly ========================================= writable-under-readonly.sh: skipped test: must be run as root SKIP tests/mkdir/writable-under-readonly.sh (exit status: 77) SKIP: tests/mkdir/smack-root ============================ grep: can't open /proc/filesystems smack-root.sh: skipped test: this system lacks SMACK support SKIP tests/mkdir/smack-root.sh (exit status: 77) SKIP: tests/mv/hardlink-case ============================ hardlink-case.sh: skipped test: must be run as root SKIP tests/mv/hardlink-case.sh (exit status: 77) SKIP: tests/mv/sticky-to-xpart ============================== sticky-to-xpart.sh: skipped test: must be run as root SKIP tests/mv/sticky-to-xpart.sh (exit status: 77) SKIP: tests/rm/fail-2eperm ========================== fail-2eperm.sh: skipped test: must be run as root SKIP tests/rm/fail-2eperm.sh (exit status: 77) SKIP: tests/rm/no-give-up ========================= no-give-up.sh: skipped test: must be run as root SKIP tests/rm/no-give-up.sh (exit status: 77) SKIP: tests/rm/one-file-system ============================== one-file-system.sh: skipped test: must be run as root SKIP tests/rm/one-file-system.sh (exit status: 77) SKIP: tests/rm/read-only ======================== read-only.sh: skipped test: must be run as root SKIP tests/rm/read-only.sh (exit status: 77) SKIP: tests/rm/empty-immutable-skip =================================== empty-immutable-skip.sh: skipped test: must be run as root SKIP tests/rm/empty-immutable-skip.sh (exit status: 77) SKIP: tests/split/l-chunk-root ============================== l-chunk-root.sh: skipped test: must be run as root SKIP tests/split/l-chunk-root.sh (exit status: 77) SKIP: tests/tail/append-only ============================ append-only.sh: skipped test: must be run as root SKIP tests/tail/append-only.sh (exit status: 77) SKIP: tests/tail/end-of-device ============================== end-of-device.sh: skipped test: must be run as root SKIP tests/tail/end-of-device.sh (exit status: 77) SKIP: tests/touch/now-owned-by-other ==================================== now-owned-by-other.sh: skipped test: must be run as root SKIP tests/touch/now-owned-by-other.sh (exit status: 77) SKIP: tests/factor/t00 ====================== t00.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t00.sh (exit status: 77) SKIP: tests/factor/t01 ====================== t01.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t01.sh (exit status: 77) SKIP: tests/factor/t02 ====================== t02.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t02.sh (exit status: 77) SKIP: tests/factor/t03 ====================== t03.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t03.sh (exit status: 77) SKIP: tests/factor/t04 ====================== t04.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t04.sh (exit status: 77) SKIP: tests/factor/t05 ====================== t05.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t05.sh (exit status: 77) SKIP: tests/factor/t06 ====================== t06.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t06.sh (exit status: 77) SKIP: tests/factor/t07 ====================== t07.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t07.sh (exit status: 77) SKIP: tests/factor/t08 ====================== t08.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t08.sh (exit status: 77) SKIP: tests/factor/t09 ====================== t09.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t09.sh (exit status: 77) SKIP: tests/factor/t10 ====================== t10.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t10.sh (exit status: 77) SKIP: tests/factor/t11 ====================== t11.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t11.sh (exit status: 77) SKIP: tests/factor/t12 ====================== t12.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t12.sh (exit status: 77) SKIP: tests/factor/t13 ====================== t13.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t13.sh (exit status: 77) SKIP: tests/factor/t14 ====================== t14.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t14.sh (exit status: 77) SKIP: tests/factor/t15 ====================== t15.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t15.sh (exit status: 77) SKIP: tests/factor/t16 ====================== t16.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t16.sh (exit status: 77) SKIP: tests/factor/t17 ====================== t17.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t17.sh (exit status: 77) SKIP: tests/factor/t18 ====================== t18.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t18.sh (exit status: 77) SKIP: tests/factor/t19 ====================== t19.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t19.sh (exit status: 77) SKIP: tests/factor/t20 ====================== t20.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t20.sh (exit status: 77) SKIP: tests/factor/t21 ====================== t21.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t21.sh (exit status: 77) SKIP: tests/factor/t22 ====================== t22.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t22.sh (exit status: 77) SKIP: tests/factor/t23 ====================== t23.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t23.sh (exit status: 77) SKIP: tests/factor/t24 ====================== t24.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t24.sh (exit status: 77) SKIP: tests/factor/t25 ====================== t25.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t25.sh (exit status: 77) SKIP: tests/factor/t26 ====================== t26.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t26.sh (exit status: 77) SKIP: tests/factor/t27 ====================== t27.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t27.sh (exit status: 77) SKIP: tests/factor/t28 ====================== t28.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t28.sh (exit status: 77) SKIP: tests/factor/t29 ====================== t29.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t29.sh (exit status: 77) SKIP: tests/factor/t30 ====================== t30.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t30.sh (exit status: 77) SKIP: tests/factor/t31 ====================== t31.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t31.sh (exit status: 77) SKIP: tests/factor/t32 ====================== t32.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t32.sh (exit status: 77) SKIP: tests/factor/t33 ====================== t33.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t33.sh (exit status: 77) SKIP: tests/factor/t34 ====================== t34.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t34.sh (exit status: 77) SKIP: tests/factor/t35 ====================== t35.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t35.sh (exit status: 77) SKIP: tests/factor/t36 ====================== t36.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t36.sh (exit status: 77)