Re: [Discuss-gnuradio] Tuner modules?

[Chuck Swiger]

At 08:24 PM 11/29/2004 -0800, you wrote:
> On Mon, Nov 29, 2004 at 10:20:58PM -0500, James Hall wrote:
> > Would these be suitable for Gnuradio use?
> > 
> http://www.windsordistributors.com/onlinestore/index.aspx?tabindex=0&tabid=1&productid=66&directoryid=-1&ctrl=productdetails 
>
> > I happened to stumble across them earlier. They're 50 cents/pc but it's a
> > min. order of 100.
>
> They might work.  In any event you'll need a real data sheet to figure
> out how to use them.  If you can't get a data sheet I'd pass on them.

FWIW I'm focusing on Tom Huppi's ebay tuners, the Microtune 4707 PH5 
3X7827. You can
get a data sheet for the 4706 PH5 (3x8264, 3x8287, 3x8320) which I'm going to
/assume/ is close enough. Have traced one 5vdc pin back to an IC which 
means the
other p/s pin must be the 33v.   Other than that I'm trying to get an I2C 
bus going
to talk to it, plus learn about I2C ;)

--Chuck