[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] using ADC of a TV-card with CX2388x chip or digit

From: zarquon
Subject: Re: [Discuss-gnuradio] using ADC of a TV-card with CX2388x chip or digital TV-reception chips/cards
Date: Wed, 26 Jan 2005 00:46:20 -0500
User-agent: Mutt/1.5.6i

On Wed, Jan 26, 2005 at 01:39:13AM +0100, Martin Dvh wrote:
> I have thought of a few tests which can be performed by people owning a 
> cx2388x TV-card.
> These test should give us a clue if and how it can be used for continuous 
> (RAW) capturing.

It's late so I'm not going to follow up on these right now:

cx88xx: Unknown symbol cleanup_module
cx88xx: Unknown symbol init_module

insmod ./cx8800.ko cap_raw_all=1 frm_size=256 dwords=2048

cx8800: Unknown parameter `cap_raw_all'
cx8800: Ignoring new-style parameters in presence of obsolete ones
cx2388x v4l2 driver version 0.0.4 loaded
cx8800[0]: quirk: PCIPCI_TRITON -- set TBFX
cx8800[0]: found at 0000:00:12.0, rev: 5, irq: 12, latency: 32, mmio:
cx8800[0]: subsystem: 107d:6613, board: Leadtek Winfast 2000XP Expert
cx8800[0]: i2c register ok
cx8800[0]: Leadtek Winfast 2000 XP config: tuner=43, eeprom[0]=0x01
cx8800[0]: registered device video0 [v4l2]
cx8800[0]: registered device vbi0
cx8800[0]: registered device radio0
cx8800[0]: set_audio_standard_BTSC (status: known-good)
cx8800[0]: cx88: tvaudio thread started
cx8800[0]: AUD_STATUS: 0xf872 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf6b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf5b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf672 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: cx88: tvaudio thread exiting


reply via email to

[Prev in Thread] Current Thread [Next in Thread]