[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] fsk mod-demod

From: Bob Vincent
Subject: [Discuss-gnuradio] fsk mod-demod
Date: Wed, 16 Feb 2005 17:55:39 -0500

I've been working with fsk_tx and fsk_rx between a pair of usrp boards.
I've noticed that the fsk_tx has widely different behavior for different settings. On the nominal rx board, I run the fft display, expecting to see the same fft as in the tx window.
What I see instead is pretty much noise.
When I run the siggen, I've got a nice strong tone at the right frequency.
On an external scope, I see the waveform mostly looking ok for the nominal settings (looks a lot like a sine wave, and if you open it up, looks like two sine waves.
I've been running with a 4e6 cordic frequency.
I'm coming to the conclusion that perhaps something is broken in the usrp interp filter.

Any suggestions for settings, or places to look? I'm also trying to cut down the data rate through the USB, and that seems to have some similar problems.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]