[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Re: USRP Success??

From: Matt Ettus
Subject: [Discuss-gnuradio] Re: USRP Success??
Date: Thu, 17 Feb 2005 09:32:17 -0800
User-agent: Internet Messaging Program (IMP) 4.0-cvs

Quoting "Robert W. McGwier" <address@hidden>:

> n4hy:/usr/local/GnuRadio/gnuradio-examples-0.3/python/usrp # ./usrp_fft.py
> usrp: found usrp rev2
> RX d'board A: Invalid EEPROM contents
> RX d'board B: <none>
> uOuOuO
> What is the EEPROM error about?
> The USRP is found and running.  I put the daughter boards on the A side
> as per the photo
> in the USRP Wiki.

The is good.  Let me explain the EEPROM thing.  There is an EEPROM on the main
USRP which I program before shipping.  Each daughterboard has its own EEPROM. 
This allows the USRP to determine which daughterboards are installed.  I DON'T
program these before shipment, which is why you get that message.  You can (and
should) program the EEPROMs by using  usrp/host/apps/burn-basic-eeprom


reply via email to

[Prev in Thread] Current Thread [Next in Thread]