Re: [Discuss-gnuradio] interfacing usrp

[Robert McGwier]

One modification.  If the TVRX is in RX-B port use

./tvrx_wfm_rcv_gui.py --freq 100.1  -w 1


Bob






Eric Blossom wrote:

> On Thu, Jun 09, 2005 at 03:29:42PM +0530, KUNAL RAJANI wrote:
>  
>
> > hi all,
> > i have just started on with gnu radio and have installed all the required
> > libraries. I would like to know that how do we connect the usrp to the
> > computer and interface it (in linux), i.e. how do i upload the program for
> > fm receiving onto the device and how do i process the output.
> > thanks in advance,
> > Kunal
> >
> >    
>
> If you have the TV_RX daughterboard you should be able to do this:
>
> (1) Connect a cheap FM dipole antenna to the F connector on the TV_RX
>    daughterboard. 
> (2) Plug the power supply into the wall and the other end into the USRP.
> (3) Connect the USB cable between the board and your PC (requires USB 2.0
>    on PC).  Then,
>
>  $ cd .../gnuradio-examples/python/usrp
>  $ ./tvrx_wfm_rcv_gui.py --freq 100.1           # listen to FM 100.1
>
> Eric
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
>