[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] AGC using RXPGA on MxFE
From: |
Sachi |
Subject: |
Re: [Discuss-gnuradio] AGC using RXPGA on MxFE |
Date: |
Tue, 19 Jul 2005 11:13:31 -0700 (PDT) |
Hi, Eric
Would you please iterate more on the concept of PGA?
I don't understand it quite well. Is it just an
amplifier after the ADC, so that the 16-bit signed
integer is multiplied by the value of pga? Or, let's
say the pga is 10, is it true that the p-p value of
the adc is not 1V--1V, but 0.1V - -0.1V, so that the
ADC can quantize the signal more subtly??
And how about the Tx path?
Thanks
Sachi
--- Eric Blossom <address@hidden> wrote:
> On Tue, Jul 19, 2005 at 06:08:27AM +0500, Ahmad
> Sheikh wrote:
>
> > The USRP user guide states that there is 20 db of
> gain on the
> > USRP. Assuming that this is on the Receive path
> Programmable Gain
> > Amplifier on the MxFE, can this be used as an AGC?
>
> Yes.
>
> > I want to control the strength of the signal
> received. The way to do
> > this, I think, would be to dynamically alter the
> value written to
> > the Rx A/Rx B registers, using some feedback
> control
> > mechanism. Would this control be on the FPGA, or
> GNU Radio
> > Python/C++ software using
> usrp.source_c().set_pga()? Is there
> > already some structure provided to do this?
>
> The easiest way is using usrp.source_c().set_pga()
>
> Eric
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
>
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs