[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Re: Noise while executing USRP examples
From: |
Eric Blossom |
Subject: |
[Discuss-gnuradio] Re: Noise while executing USRP examples |
Date: |
Tue, 9 Aug 2005 22:23:51 -0700 |
User-agent: |
Mutt/1.5.6i |
On Wed, Aug 10, 2005 at 10:34:32AM +0530, Arora_Amit wrote:
>
> 1) We are running the USRP examples on USRP board fsk_tx.py
> and fsk_rx.py on one PC. During execution we are receiving too much of
> noise, what might be the reason?.any solution?
>
> 2) Can we run both fsk_tx.py and fsk_rx.py simultaneously
> on the same PC or do we need to run them on two different PC's ?
>
> 3) While running nbfm_ptt_quick_and_dirty.py we are
> receiving lot of noise. Please provide some solution?
Matt and I will be sorting out the Tx/Rx example sometime before we
release 2.6.
> 4) As suggested in the USRP document, we are using the
> antenna with following specifications:
An antenna tuned for 5 GHz is not going to work well for Tx and Rx
taking place at 29 MHz...
Eric