[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] usb_claim_interface error
From: |
Robert Roberts |
Subject: |
Re: [Discuss-gnuradio] usb_claim_interface error |
Date: |
Tue, 18 Oct 2005 16:49:00 -0400 |
I get the same thing in Redhat FC4.
~Chris~
----- Original Message -----
From: Javs <address@hidden>
Date: Tuesday, October 18, 2005 12:13 pm
Subject: Re: [Discuss-gnuradio] usb_claim_interface error
>
> > No clue. Is there anything interesting in the
> > kernel logs?
>
> Nothing going on in the logs when i run the code. But
> the usb allocates a new address to the usb (old
> adress+1) upon reconnecting the power cable.
>
> Here are a few more observations i made:
>
> When i do a 'lsusb' upon system restart, I get the
> usrp on Bus 1 and device 2 after i force the
> bitstream. Now, when i disconnect and reconnect the
> power, the device changes to 3 with default
> permissions of '-rw-rw-r--' and the device address
> increments upon further reconnects. As a test, here i
> forced the bitstream (so that the examples work) and
> then changed the permission by 'chmod 000 -R
> /proc/bus/usb/001/*'. After this, no usrp found as
> expected. Changed back to 'chmod 777 -R
> /proc/bus/usb/001/*' and it works again.
>
> So, look like it does not stabilize on the device
> address after power reconnect. The changing of
> permissions (777) is not effected as it is creating a
> new mount with a new address at each reconnect with
> default permissions(664).
>
> Still experimenting !
>
> -Javs
>
>
>
> __________________________________
> Start your day with Yahoo! - Make it your home page!
> http://www.yahoo.com/r/hs
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
- Re: [Discuss-gnuradio] usb_claim_interface error,
Robert Roberts <=