[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] RF no tune preamplifier

From: Eric Blossom
Subject: Re: [Discuss-gnuradio] RF no tune preamplifier
Date: Mon, 13 Mar 2006 10:19:20 -0800
User-agent: Mutt/1.5.9i

On Mon, Mar 13, 2006 at 10:09:57AM -0800, Matt Ettus wrote:
> Matteo Campanella wrote:
> > I've just finished a low noise preamplifier prototype based on Avago
> > MGA62563, and I would like to use it in conjunction with the tvrx - the
> > device needs 3V @ 60mA, or 5V - is there any place on the board where I
> > can get such a supply safely?
> > 
> >
> If you have unused daughterboard slots, put a BasicTX or BasicRX in one
> of them.  They both have pins for 3.3V.
> Matt

We're running unregulated +6V to the daughterboards, right?

There's probably somewhere to connect a wire to the TVRX to get the
+6V.  Or locally regulated +5V.  A look at the schematics would shed
some light. 


reply via email to

[Prev in Thread] Current Thread [Next in Thread]