[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] AOR 5000 as front end to USRP
From: |
Eric Blossom |
Subject: |
Re: [Discuss-gnuradio] AOR 5000 as front end to USRP |
Date: |
Sun, 31 Dec 2006 11:15:40 -0800 |
User-agent: |
Mutt/1.5.9i |
On Sun, Dec 31, 2006 at 01:42:31PM -0500, Eric A. Cottrell wrote:
> Hello,
>
> Thanks to both of you for the information. I got the RX PGA gain up all
> the way. I rewound the isolation transformer to be 1:1 with 14 turns.
> I still have to turn off AGC for good signal levels but I got 20 to 30
> dB SNR on RCI at noon today.
>
> Doing some simple tests with the PSD display in DReam I can not see the
> noise floor increase when the receiver connected. The FFT from the
> USRP data also shows no increase so an amplifier is needed. What
> amplifier do you use on the AR8600?
I used a Ramsey PR2 broadband preamp (it's probably overkill, but it's
what I had on hand)
http://www.ramseyelectronics.com/cgi-bin/commerce.exe?preadd=action&key=PR2
Eric