[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: Re: [Discuss-gnuradio] USRP.. programming the FPGA..

From: pankaj kumar
Subject: Fwd: Re: [Discuss-gnuradio] USRP.. programming the FPGA..
Date: Thu, 1 Mar 2007 02:35:47 -0800 (PST)


i need help regarding this..

its urgent..

Note: forwarded message attached.

It's here! Your new message!
Get new email alerts with the free Yahoo! Toolbar.
--- Begin Message --- Subject: Re: [Discuss-gnuradio] USRP.. programming the FPGA.. Date: Wed, 28 Feb 2007 01:37:09 -0800 (PST)
i have tried with USRP_fft.py and then took a sinosidal input and then after running this on cygwin (on window xp) , we were able to see this sine wave at one RX daughter board.
so now we didnt understood that by doing so how the FPGA is programmed for this operation, what we have done for that.
as i guess that USRP_FFT.PY must be containing some instantiation of    .RBF file.
so what i understood is that first we have to generate a .RBF file from a verilog code using quartus 2 software and then we have to use usrp_fft.py to download it into FPGA.
but i am not clear how it is happening, suppose if i will modify .RBF file then should i need to modify usrp_fft.py code also....
i hope for more information regarding this..
thank you

Eric Blossom <address@hidden> wrote:
On Mon, Feb 26, 2007 at 08:21:10AM -0800, pankaj kumar wrote:
> the code which you have suggested, how to get that..?
> usrp_fft.py
> where i am supposed to get this one...
> pankaj

First off, download the GNU Radio code.

Start here: http://gnuradio.org/trac/wiki

It's in gnuradio-examples/python/usrp/usrp_fft.py


Never Miss an Email
Stay connected with Yahoo! Mail on your mobile. Get started!
Discuss-gnuradio mailing list

--- End Message ---

reply via email to

[Prev in Thread] Current Thread [Next in Thread]