[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] GNU Radio interface to Code Composer Studio

From: ayman shalaby
Subject: Re: [Discuss-gnuradio] GNU Radio interface to Code Composer Studio
Date: Tue, 20 Mar 2007 18:30:54 -0400 (EDT)


What about i don't want to break the USRP .

Is it possible to interface GNURadio with Code Composer Studio?

Ayman Shalaby
- Hide quoted text -

On 3/21/07, Eric Blossom <address@hidden> wrote:
> On Tue, Mar 20, 2007 at 06:09:08PM -0400, ayman shalaby wrote:
> > Hi All
> >
> > I have realized lately in order to implement my own signal processing
> > algorithms on the FPGA i have to break the USRP which could be waste
> > of time to me.
> >
> > My goal instead of performing the heavy signal processing on the PC's GPP,
> > is to implement them on TI 6416 DSK and interface GNURadio to Code
> > Composer Studio under Windows (as Code Composer Studio isn't  supported under
> > Linux).
> >
> > The USRP will be only used for the DDC and DUC
> >
> > I don't know how this interface can be done ,and i don't think anybody
> > before done what we are planning to do now . But I just  wonder anyone can give us some guidelines  or opinions.
> >
> > Thanks in advance
> > Ayman Shalaby
> This should be possible, if you're willing to do some work.
> For sake of discussion, assume that the "real" daughterboard(s) that
> you want to use are installed on the "A-side" of the USRP.
> Then, if you installed a Basic Rx and a Basic Tx on the "B-side", you
> would have access to 32 i/o pins that connect to the FPGA, 16 on the
> Basic Tx and 16 on the Basic Rx.
> You have complete control over what happens with those pins, and could
> use them to interface (somehow) to the TI 6414.
> Eric

Ayman M. Shalaby

Now you can have a huge leap forward in email: get the new Yahoo! Mail.
reply via email to

[Prev in Thread] Current Thread [Next in Thread]