[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Bluetooth using RFX-2400

From: Dominic Spill
Subject: Re: [Discuss-gnuradio] Bluetooth using RFX-2400
Date: Wed, 16 May 2007 19:19:22 +0100
User-agent: KMail/1.9.6

I think I may've mis-phrased the question, if I have a single daughterboard 
and I tune to 2.44GHz, what are the highest and lowest frequencies that I 
should be able to see when I run something like the usrp_fft waterfall 


On Wednesday 16 May 2007 19:10:15 Tarun Tiwari wrote:
> Hi Dominic,
> RFX2400 works in the range of 2.3GHz - 2.9GHz (both TX/RX)
> and you may check out http://gnuradio.utah.edu/trac/wiki/UsrpRfxDiagrams
> for connection diagrams. There is a bandpass filter on board which restrict
> you to ISM band (2.4 - 2.4835 GHz) , but it can be bypassed if you need.
> Here you may filter 83.5 MHz spectrum without bypassing the BPF.
> Well, can you send me the codes which you have written.
> Regards,
> Tarun
> University of Texas at Dallas

reply via email to

[Prev in Thread] Current Thread [Next in Thread]