[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Failed to set TX frequency!!

From: Eng. Firas
Subject: Re: [Discuss-gnuradio] Failed to set TX frequency!!
Date: Wed, 4 Jul 2007 11:42:42 -0700 (PDT)

Hi Johnathan,

Sorry for not being clear. I was making a new usrp_source.py & usrp_sink.py
files (attached below) to be posted to gunradio. Testing the new
usrp_source.py code was ok for all frequencies and daughter boards. However,
testing usrp_sink.py code, with TX frequencies between 44MHz and 83 MHz gave
me the tuning function failing indication which I use it to print the
message "Failed to set TX frequency". This is strangely happening to the
Basic TX daughter board only in this frequency range.


http://www.nabble.com/file/p11435727/new_usrp_source.py new_usrp_source.py 
http://www.nabble.com/file/p11435727/new_usrp_sink.py new_usrp_sink.py . 

Johnathan Corgan-2 wrote:
> Eng. Firas wrote:
>> I think there is a problem in setting TX frequency of Basic daughter
>> board
>> using the USRP  "tune"  function in the range from (45MHz to 83MHz)!.
>> Outside this range, the tune function is working fine.
> You'd have a much higher chance of getting a useful reply if you
> included a description with more content than "there is a problem."
> What is happening that shouldn't be happening?
> What isn't happening that should be happening?
> What do you see on your screen?
> Has it worked before but something changed and now it is not working?
> What changed?
> -- 
> Johnathan Corgan
> Corgan Enterprises LLC
> http://corganenterprises.com
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

View this message in context: 
Sent from the GnuRadio mailing list archive at Nabble.com.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]