[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Send and Recieve data like "Hello World"

From: Meenaktchi Venkatachalam
Subject: Re: [Discuss-gnuradio] Send and Recieve data like "Hello World"
Date: Sun, 8 Jul 2007 12:13:51 -0700

Thanks Tarun.

I am still facing problem with printing the payload as a string. It gets printed as hex thou i use %s or %r. I checked the parameters passed to the callback function in ../gnuradio-core/src/python/gnuradio/blksimpl/pkt.py and payload is converted to a string using to_string() but still when I print payload it gets printed in hex format.

Any suggestions?
Thanks for any help

On 7/6/07, Chris Albertson <address@hidden > wrote:

--- Tarun Tiwari <address@hidden > wrote:

> Meenaktchi,
> You can pack "Hello World" string as paylaod then use
> send_pkt(payload) on
> the transmiter side. similarly unpack the payload at reciever to
> convert
> into string.
> you need to use same formating for pack and unpack at Tx & Rx
> respectively.

Why not implement a mode that is common in the real
world?  Then you can test your receiver by listening
to real signals. No need to have a transmitter working

RTTY is the most basic and simple
digital mode possable.  There are no frames
and no packets, no protocol and the data rates
is very low, about 45 characters per second
It is just asynchronous FSK
using two tones 1200 Hz apart.  See
The technology is so simple it predates computers

There are many programs for doing RTTY on a PC
under Linux or Windows using just a sound card
So you can download and run an example working
system, get it to work, then duplicate it using

The "hello world" should be the simplest thing
that can still work.  I think RTTY is that.

Chris Albertson
  Home:   310-376-1029  address@hidden
  Office: 310-336-5189  address@hidden

Get the Yahoo! toolbar and be alerted to new email wherever you're surfing.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]