[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Cypress FX2 problems

From: Darrell Harmon
Subject: [Discuss-gnuradio] Cypress FX2 problems
Date: Tue, 24 Jul 2007 23:03:29 -0500
User-agent: Icedove (X11/20070328)

I am currently working on an SDR board with a LTC2208 16 bit 125 MHz ADC and a 14 bit 125 MHz DAC and everything is working well except for the USB interface. I am using the Cypress FX2LP CY7C68013A-56PVXC chip. It is driving the SLOE/PA2 pin at all times (even in reset). It is supposed to default to input according to Cypress, so that means something is either wrong with my board or the chips. 3 chips act the same. On one, I connected nothing but power and ground and the same symptoms exist. Oddly enough, it drives SLOE high when not in reset and drives it low when in reset. The USB interface and 8051 parts work fine. Any ideas? I have been trying to get this working for nearly a month and may have to do a board revision to get rid of the FX2. I would appreciate any ideas. If anyone has one of the original CY7C68013-56 parts, I may be interested in buying it to test on my board.

I put the schematic on the web if anyone wants to take a look:
I have since changed the RC reset circuit to the values recommended by Cypress and added a few jumpers.
The power supply ramp up rate is within the spec given by Cypress.

Darrell Harmon

reply via email to

[Prev in Thread] Current Thread [Next in Thread]