[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] looking at a wider spectrum
From: |
meggahertz |
Subject: |
Re: [Discuss-gnuradio] looking at a wider spectrum |
Date: |
Thu, 18 Oct 2007 10:23:21 -0700 (PDT) |
Thank you, I tried that last night and was able to make it 8MHz, so looks
like it works. So there is no way to take a look at the fft of the entire
spectrum supported by the RX board at once?
Eng. Firas wrote:
>
> Hi,
>
> Use usrp_fft.py with decimation rate of 8. In this case, you can see 8MHz
> of spectrum. Also, you can use 8 bit data transfer with decimation rate of
> 4 to look at 16 MHz wide spectrum.
>
> Firas
>
>
> meggahertz wrote:
>>
>> I am new to the GNU Radio and am running the usrp_wfm_rcv.py but it only
>> shows the spectrum of width ~ 0.4Mhz. How can I look at a wider spectrum
>> instead of just 0.4MHz around the carrier frequency?
>>
>>
>
>
--
View this message in context:
http://www.nabble.com/looking-at-a-wider-spectrum-tf4643642.html#a13279350
Sent from the GnuRadio mailing list archive at Nabble.com.