[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] USRP / DBSRX calibration

From: Firas A.
Subject: Re: [Discuss-gnuradio] USRP / DBSRX calibration
Date: Wed, 26 Dec 2007 21:50:43 -0800 (PST)


During my tests with DBSRX board, I noticed that using the same Local
Oscillator offset tick (by 4MHz) used with the RFX boards in the dbsrx
board, enhanced the dbsrx SFDR by about 14 dB as shown in the following
figures :


I used 1000.25 MHz sine wave to do the tests. To simulate the dbsrx LO
offset I cheated the usrp_fft.py   set_freq()  function as follows :

r = self.u.tune(0, self.subdev, target_freq+4000000)

Firas A.

View this message in context: 
Sent from the GnuRadio mailing list archive at Nabble.com.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]