[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Problems after replacing the F501 fuse

From: Eric Blossom
Subject: Re: [Discuss-gnuradio] Problems after replacing the F501 fuse
Date: Sat, 15 Mar 2008 18:07:32 -0700
User-agent: Mutt/1.5.17 (2007-11-01)

On Sat, Mar 15, 2008 at 02:52:32PM +0100, Staffan Josefsson wrote:
> Hi.
> After blowing up and replacing the F501 fuse the USRP is found by the
> computer but it doesn't give me any signal. The usrp_fft.py-window is
> emty accompanied with the error message "Faild to set initial frequency"
> and the benchmark stops working at 2MB/s. We believe the ADC is damaged.
> Is there anyone out there with similar problems or a solution?

"Failed to set initial frequency" usually means that you asked a
daughterboard to tune out of it's range.

If you want to specify 92 MHz, use -f 92M, not -f 92


reply via email to

[Prev in Thread] Current Thread [Next in Thread]