[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Possible residual carrier not reported correctly
From: |
isaacgerg |
Subject: |
Re: [Discuss-gnuradio] Possible residual carrier not reported correctly |
Date: |
Mon, 28 Jul 2008 12:27:22 -0700 (PDT) |
Eric,
I pulled GNU Radio from the SVN repository no more than 3 months ago.
What do you mean the FPGA had a flipping problem? Wouldnt this affect my
USRP hardware or does the GNU Radio code correct for it?
Isaac
Eric Blossom wrote:
>
> On Mon, Jul 28, 2008 at 11:34:01AM -0700, isaacgerg wrote:
>>
>> Eric,
>> I have answered you questions inline:
>>
>> >>Are you seeing any over or underruns ("uOuO" or "uUuU") on the console?
>> Occasionally, I see "u0" on the rx. But, even if i post process data
>> offline, i still get the "flip"
>>
>> >> How wide is the signal you're trying to send?
>> The rx interp is 256 and the tx interp is 512 giving a BW=250Khz.
>> Since I
>> am just sending random samples, I am using the whole band.
>>
>> >> What interpolation and decimation values are you using?
>> See above.
>>
>> >> Try sending it at 10MHz.
>> I did. The Rx cannot see my signal anymore; a PSD confirms this. Not
>> sure why.. maybe an antenna issue.
>>
>> >> What version of GNU Radio are you using?
>> I do not know what version the radios are. How do i find this out? The
>> serial numbers are 1460 and 1461 and there is a date on the sticker that
>> says 4/16/07.
>
>
> Sorry, not the board, the GNU Radio software you're running on the host.
>
> There was a problem in the FPGA code that was fixed quite a while
> ago (6 or 9 months) where there was some kind of flipping.
>
>
>> >> Have you isolated the problem to the Tx or Rx path?
>> I believe it is in the Rx path. The TX path simply reads up a data
>> file
>> of samples and sends them to the USRP... very simple. The RX path
>> receives
>> the data and attempts to correlate on the samples I sent. However, I am
>> noticing that the correlation is postive, then negative, and continues
>> this
>> way alternating about every 1000 samples or so.
>>
>> Isaac
>
> Eric
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
--
View this message in context:
http://www.nabble.com/Possible-residual-carrier-not-reported-correctly-tp18659713p18697521.html
Sent from the GnuRadio mailing list archive at Nabble.com.
- [Discuss-gnuradio] Possible residual carrier not reported correctly, isaacgerg, 2008/07/25
- [Discuss-gnuradio] Possible residual carrier not reported correctly, isaacgerg, 2008/07/25
- Re: [Discuss-gnuradio] Possible residual carrier not reported correctly, Eric Blossom, 2008/07/25
- Re: [Discuss-gnuradio] Possible residual carrier not reported correctly, isaacgerg, 2008/07/28
- Re: [Discuss-gnuradio] Possible residual carrier not reported correctly, Eric Blossom, 2008/07/28
- Re: [Discuss-gnuradio] Possible residual carrier not reported correctly,
isaacgerg <=
- Re: [Discuss-gnuradio] Possible residual carrier not reported correctly, Eric Blossom, 2008/07/28
- Re: [Discuss-gnuradio] Possible residual carrier not reported correctly, isaacgerg, 2008/07/28
- Re: [Discuss-gnuradio] Possible residual carrier not reported correctly, isaacgerg, 2008/07/28
- Re: [Discuss-gnuradio] Possible residual carrier not reported correctly, Dan Halperin, 2008/07/28