[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Trondeau C++ daughterboard code
From: |
Stefan Brüns |
Subject: |
Re: [Discuss-gnuradio] Trondeau C++ daughterboard code |
Date: |
Mon, 06 Oct 2008 19:31:04 +0200 |
User-agent: |
KMail/1.9.9 |
On Monday 06 October 2008 18:02:29 Per Zetterberg wrote:
> Dear All,
>
> I am trying to migrate from home-made daughterboard code to the code by
> Trondeau. I am using the version 9305. I use db_flexrf_1800_tx_mimo_b.
> After changing "d_common->R_DIV(1)" to "d_common->R_DIV(16)" the signal is
> showing up on my spectrum analyzer at the correct frequency. However, the
> amplitude is about 25dB weaker than when using the home-made daughterboard
> code. I am using the daughterboard code as given by the code fragment
> below. Does anyone have an idea what could be wrong ?
The DB code sets the gain in the 9862 to the wrong value (there is something
wrong with the calculation of the register value from the gain in db) - this
may be fixed in the cppdb feature branch.
Stefan
--
Stefan Brüns / Bergstraße 21 / 52062 Aachen
mailto:lurch at gmx.li http://www.kawo1.rwth-aachen.de/~lurchi/
phone: +49 241 53809034 mobile: +49 151 50412019