Re: [Discuss-gnuradio] LFTX/LFRX frequency range

[Matt Ettus]

Christian Schroeder wrote:
> Hi together,
>
> we want to use the USRP2 with LFTX/LFRX boards to make transmissions 
> in a low frequency regime from below 1 kHz up to about roughly 50 kHz. 
> The daughterboard specifications give a frequency range from DC to 30 
> MHz.
>
> We are now wondering, if we will experience some degradations since we 
> want to work near the specification limits.
> Does anybody know about the frequency response at these frequencies? 
> Is there something like a lower bound given by the hardware for 
> reasonable working frequencies?

There should be no problem going all the way down to DC.

Matt