[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] No Signal from XCVR2450 using usrp2_fft.py

From: Thomas Graf
Subject: Re: [Discuss-gnuradio] No Signal from XCVR2450 using usrp2_fft.py
Date: Wed, 17 Dec 2008 21:33:09 +0100
User-agent: Thunderbird (Windows/20081105)

Hi Matt,

> I have not gotten the xcvr2450 driver ported the USRP2 yet.  As of now
> all daughterboards except for the DBSRX and XCVR2450 are supported. 
> Those last 2 will be supported soon.

Because I would really need this working soon I began to port that
myself. So far no success yet. I get it discovered now (db 0x61).
I get the debugging over the UART. Unfortunately I don't find the
schematic of the XCVR2450. Is it somewhere available as PDF?
I'm already reading the Maxim's data sheet.
If "soon" means in the next days i would wait ;)

I tried to use another SD-Card, but it didn't work. Only with the
original SD-Card is working. Is there some other brand which is known to
be working with the USRP2? I'm just afraid I might destroy the card
always keeping re-flashing the firmware.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]