[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Re: Broken USRP report

From: Vincenzo Pellegrini
Subject: [Discuss-gnuradio] Re: Broken USRP report
Date: Mon, 16 Feb 2009 19:30:44 +0100

I was told by Matt to run an executable you can find within the trunk. It rewrote the eeprom and solved the problem.

I suppose it was this one.. but I'm not sure as it seems to target daughterboards instead of the motherboard...


Please ask the list for confirmation about this...

best regards to all


2009/2/16 <address@hidden>
Hi Vincenzo,
I'm Thu from Hanoi, Vietnam. After working with the USRP for 2 weeks I have the same problem with you. The LED is off while the fan is running and the fuse F501 is OK.

How about you and what happened with your USRP?

Vincenzo Pellegrini wrote:
> Hi everybody,
> I've got really no idea of what happened.. I have been working a few
> hours with my USRP, then I switched it off for about an hour. Then I
> came back, re-plugged power into it and I got 'Unable to find USRP#0'.
> I checked the led and it was not flashing.
> The fuse F501 seems ok (I can still measure a 6V tension past it with my
> tester)
> The fan spins as always.
> It's quite a new bought one: Ser=2687
> Can anyone help with suggestion to figure out the problem?
> thanks
> vincenzo
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Quoted from:

Vincenzo Pellegrini

reply via email to

[Prev in Thread] Current Thread [Next in Thread]