[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] USRP 2 Daughter Cards

From: 'Eric Blossom'
Subject: Re: [Discuss-gnuradio] USRP 2 Daughter Cards
Date: Thu, 19 Feb 2009 11:24:16 -0800
User-agent: Mutt/1.5.18 (2008-05-17)

On Thu, Feb 19, 2009 at 01:21:37PM -0500, jim graham wrote:
> Eric
> We are using Fedora Linux version 7 on an x86 machine.


[Please be sure to hit Reply-All to reply to the writer and the list.]

> The GNU radio software is Revision 10211 (jcorgan) 
> Last change date 1/12/2009
> We have the USRP 2 connected to a directional antenna.  I have used the 
> dbs daughtercard hooked to the same antenna with a USRP 1 to verify 
> a signal is present.
> For the dbs and lfrx daughtercards are the set_center_freq outputs of 0 for 
> Baseband freq and -commanded freq for ddc freq correct?  
> The output of the call using a flex1800 daughtercard is different.

What rx_daughterboard_id() does the USRP2 report for your RFX 1800?

With regard to RFX boards, the USRP2 only supports the MIMO_B version.
Any board that the firmware doesn't recognize is treated as a Basic Rx
or Basic Tx.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]