[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Installing Gnu Radio 3.2 on centOS machine

From: Johnathan Corgan
Subject: Re: [Discuss-gnuradio] Installing Gnu Radio 3.2 on centOS machine
Date: Thu, 26 Feb 2009 14:56:11 -0800

On Thu, Feb 26, 2009 at 2:45 PM, Bruce McGuffin <address@hidden> wrote:

> The output from running configure is very long, the last bit summarizing
> what happened (below) says gnuradio-core was successfully configured, but
> some other
> stuff wasn't. Then make ran without generating an error. Would one of the
> the
> things not configured cause the problem? If so, why wasn't it configured?

Your list of modules is fine; gnuradio-core configured and was
compiled and installed.

It's likely you don't have PYTHONPATH set correctly.  Some OSes need
it, some don't.  Presumably, the gnuradio Python components got
installed to:


Try putting that path or the correct one into the PYTHONPATH
environment variable.  If that works, you'll need to set this in your
login scripts.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]