[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] USRP Basics questions

From: Josh Blum
Subject: Re: [Discuss-gnuradio] USRP Basics questions
Date: Mon, 13 Apr 2009 21:27:13 -0700
User-agent: Thunderbird (X11/20090318)

Somya Ajmera wrote:
HI Josh, we have basic TX , RX daughter board with us. also what is that range 
you have mentioned into your reply is for?

Many times, users give the usrp sink numbers between +/- 1.0 and there is no transmit power. Just to double check, you should be giving usrp numbers around +/- 10e3 :-)

As far as how you can see the signal:

You can hook up an oscilloscope to one of the SMA connectors on the basic TX (TXA or TXB)

Or, connect the basic RX to the basic TX with SMA to SMA connector, and use a program like usrp_oscope.py or usrp_fft.py to look at the received signal.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]