[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Benchmark_tx/rx with audio input and output

From: udadidd
Subject: [Discuss-gnuradio] Benchmark_tx/rx with audio input and output
Date: Mon, 24 Aug 2009 11:29:10 -0700 (PDT)


I wanted to do the benchmark tx and rx with Audio instead of the USRP.
I made all the changes to the transmitter and the receiver. The transmitter
works fine but the receiver hangs!!

I do the upconversion on transmitter after modulating, and transmit. and do
the downconversion on receiver side before demodulating.

Upconversion : I multiply by a sine wave
Downconversion : I multiply by both sine and cos, (which make I and Q) and
use a float_to_complex to make them into one complex stream.

I set the converter rate = sample rate = 18000
frequency = 250 Hz
interp_deci_rate = 200
Bit rate comes to 45 when samples_per_symbol = 2

I guess the hanging is at the delete_head() stage of the pkt.py! That just
means the packets received are not in proper format! Wr can i possibly be
going wrong? I am stuck here and any suggestion will be of great help!

Thank u

View this message in context: 
Sent from the GnuRadio mailing list archive at Nabble.com.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]