[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Peak in FFT.
From: |
Karthik |
Subject: |
Re: [Discuss-gnuradio] Peak in FFT. |
Date: |
Fri, 6 Nov 2009 18:51:10 -0800 |
On Thu, Nov 5, 2009 at 10:25 PM, Matt Ettus <address@hidden> wrote:
> Kóczián Gergely wrote:
>>
>> Hi all!
>>
>> I use my usrp without antenna. I just want to meassure the noise but,
>> at 0Hz has always a peak.
>>
>> I saw that, this was a probleme in the past also, but i didn't found
>> the solution.
>>
>> Attached picture:
>>
>> http://img4.imageshack.us/img4/2493/messung11.png
>>
>> What did I wrong?
>
> What daughterboard are you using?
>
> Matt
>
>From the attached screen shot it looks like you are using a LFRX
daughterboard. Do you have 50ohm output impedance from your source?
You can try terminating your channel with a 50ohm terminator and see
if the peak goes away.
Karthik