[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP2 firmware + cross compiled GNU Radio questio
Re: [Discuss-gnuradio] USRP2 firmware + cross compiled GNU Radio question
Sun, 29 Nov 2009 08:08:11 -0500
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:184.108.40.206pre) Gecko/20091014 Fedora/3.0-2.8.b4.fc11 Thunderbird/3.0b4
On 11/29/2009 07:52 AM, Tim Newman wrote:
Hi, I've been working on cross compiling the latest stable GNU Radio
release, 3.2.1, onto the TI Davinci DM6446 board using OpenEmbedded as
my build environment and Angstrom as my Linux Distro. I've managed to
cross compile and download gnuradio onto the board, though I'm going
with a console only Linux image so I don't have any of the gnuradio
python GUI stuff. Anyways, I am using a USRP2 and the board I'm using
doesn't have has 100T ethernet and not 1000T, so I'm using a
1000/100/10T DLink switch to do the translation.
First, maybe it was a mistype but the latest version of gnuradio is
3.2.2 not 3.2.1. Next, if you just want to test transmit, use
The slacker that supports GNURadio in OE hasn't added a recipe for
3.2.2. Wait, that's me! Still for this discussion 3.2.1 is fine.
Most of my time is spent on the git recipe in OE. If you comment out the
DEFAULT_PREFERENCE line in that recipe, you will get or more recent
build. I haven't built it on an ARM9 recently, there may be some issues
with atomic operation support in boost.
The USRP2 won't work unless you are using a GigE network card on the host.
Matt has put together a new ethernet MAC here:
I don't think this supports 10/100, maybe I'm wrong, but it may be worth
My understanding is the same as Tim's, you will need some form of GigE
interface. Unfortunately, the DM6446 does not support full HS USB host,
but it still might be possible to use a USRP1 with it. A quick read of
the docs suggests this might work.