discuss-gnuradio
[
Top
][
All Lists
]
Advanced
[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
[Discuss-gnuradio] questions about master_control.v
From
:
Yan Nie
Subject
:
[Discuss-gnuradio] questions about master_control.v
Date
:
Thu, 14 Jan 2010 13:52:42 -0500
Hi,
I'm trying build my own fpga bitstream by modifying usrp_sounder project. I've saveral questions on the module master_control.
what store in reg_0, reg_1, reg_2, and reg3?
what assign to io_0 through io_3?
Can I monitor the signal from io_tx pins in daughter board by oscilloscope?
What the difference of the two group of io_tx pins?
Thank you so much in advance!
Yan
reply via email to
[Prev in Thread]
Current Thread
[
Next in Thread
]
[Discuss-gnuradio] questions about master_control.v
,
Yan Nie
<=
Re: [Discuss-gnuradio] questions about master_control.v
,
Johnathan Corgan
,
2010/01/16
Prev by Date:
Re: [Discuss-gnuradio] Some questions on USRP2
Next by Date:
[Discuss-gnuradio] Understanding flow control
Previous by thread:
[Discuss-gnuradio] Some questions on USRP2
Next by thread:
Re: [Discuss-gnuradio] questions about master_control.v
Index(es):
Date
Thread