[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] gnu Radio and Mode S (1090 MHz)

From: Matt Ettus
Subject: Re: [Discuss-gnuradio] gnu Radio and Mode S (1090 MHz)
Date: Mon, 22 Mar 2010 10:07:22 -0700
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv: Gecko/20100301 Fedora/3.0.3-1.fc12 Thunderbird/3.0.3

On 03/16/2010 10:52 PM, Andrew Rich wrote:
Thanks Nick

I have some more questions if I may

1) What determines the bandwidth of the daughter boards for USRP ?

The bandwidth is limited by the data rate back to the computer, so with the USRP1 you get 8 MHz of RF BW, and with the USRP2 you get 25 MHz. The exception is the TVRX daughterboard which has SAW filters that limit you to 6 MHz.

2) Where do you connect if you want to bypass the RF board and connect
at base band ?

Use the LFRX daughterboards instead.  They give you baseband inputs.

3) Will I be able to achieve what I want to achieve on openSUSE linux ?


4) When you talk about "code" what language ?

C++, Python, or using GRC which is a graphical design system.

5) What is a trunk when you talk about gnu ? is that the software base ?


6) I assume I can get an RF board and do 1030 MHz as well ?

Yes.  The DBSRX will receive that frequency, as will the WBX and RFX900/

7) Can I use perl to do any of this ?

Probably not.

8) Would someone be able to guide me through this.

9) Is a "PC" suitable and quick enough to keep up with the signals ?


Does the USRP and code lag or is there plenty of time left over ?

Not sure what this means. People have done what you are trying to do already and it works.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]