[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Succesful test of VRT-branch code

From: Per Zetterberg
Subject: [Discuss-gnuradio] Succesful test of VRT-branch code
Date: Wed, 31 Mar 2010 08:47:17 +0200
User-agent: Thunderbird (X11/20100317)

Hi All,

I was able to send four bursts between two USRP2s. The two USRP2s were equipped with xcvr2450 boards. The bursts were 0.336ms long. The spacing between the bursts were 3ms. The sample rate was 25MHz. The four bursts were sent as A->B, B->A, A->B, B->A. The nodes were locked to (the same) 10MHz reference and a pps trigger. The boards were connected by cable. The very nice thing was that the channel seen in the two A->B bursts were the same (including absolute phase, timings etc.). The same applies to the two B->A bursts. This opens up many possibilities.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]