[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Burning up parts of a WBX (which side?)

From: HR Myler
Subject: [Discuss-gnuradio] Burning up parts of a WBX (which side?)
Date: Wed, 16 Jun 2010 14:32:46 -0500

From Hamza's The USRP under 1.5X Magnifying Lens! :

# Assumes Basic_Tx in slot A.  Do not do this blindly!  Output enabling all the i/o pins  
  # on other daughterboards will cause problems (burn up daughterboard  and/or FPGA)  


  u = usrp.sink_c(0, 64)  
  side = 0  # side A  
  u._write_oe(side, 0xffff, 0xffff) # set all i/o pins as outputs  

For the WBX, is side 0 (A) the RX side and side 1 (B) the TX side? Is that how that works?



CONFIDENTIALITY: Any information contained in this e-mail (including attachments) is the property of The State of Texas and unauthorized disclosure or use is prohibited. Sending, receiving or forwarding of confidential, proprietary and privileged information is prohibited under Lamar Policy. If you received this e-mail in error, please notify the sender and delete this e-mail from your system.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]