[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Setting tx_gain > 20 dB => no effect? (USRP2, XC
Sven Oliver Kreis
Re: [Discuss-gnuradio] Setting tx_gain > 20 dB => no effect? (USRP2, XCVR2450)
Wed, 23 Jun 2010 11:22:34 +0200
thanks for the advice. The standard power of USRP2 should be enough
for me, if I really get it :)
In the specifications for XCVR2450 it says 100mW or 20 dBm.
The jamming is already working, but a bit more power would be fine ;)
Yesterday I moved the micaz node around my USRP2 to find the maximum.
I couldn't get more than -13 dBm even with my micaz nearly touching
the antenna of the USRP2.
I used 30 dB gain at sink (just to be safe) and an amplitude of 1
again (so 21+ dB gain would have been about equal then).
Is there something I could do softwarewise to get more than about -13
dBm? (another amplitude, samp_rate, interpolation ...) Doing something
wrong hardware or softwarewise? Perhabs the micaz RSSI value isn't
I don't expect exactly 20 dBm at the micaz, but it should be more than
-13 dBm with the micaz just about 1cm distance to antenna, shouldn't
- Re: [Discuss-gnuradio] Setting tx_gain > 20 dB => no effect? (USRP2, XCVR2450),
Sven Oliver Kreis <=