[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] USRP2 hitch

From: Josh Blum
Subject: Re: [Discuss-gnuradio] USRP2 hitch
Date: Wed, 23 Jun 2010 10:36:48 -0700
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv: Gecko/20100423 Thunderbird/3.0.4

find_usrps wont do you any good, its for raw ethernet gr-libusrp2

You probably have a network setup issue: http://www.ettus.com/uhd_docs/manual/html/usrp2.html#setup-networking

I recommend disabling firewall, setting your static IP. If you still have issues use wireshark and/or a serial adapter on the usrp2.


On 06/23/2010 09:35 AM, Abhishek B wrote:
hi all
I have access to a USRP2 board. I recently loaded the new firmware and fpga
images onto it, which have UHD support i.e. To be precise, the firmware
image was the one released on 21st june and the fpga image was the one
released on the 15th of june, found on the Ettus website.
I have been trying to detect the usrp boards with the commands "find_usrps".
It still says "No USRP2 found".
Apart from this, I also tried to build the uhd according to the
documentation given on the ettus site. After the build, I also ran the
"uhd_find_devices" . It says "no UHD devices found"
Is there something wrong with the images or am I doing something wrong?
please help
Thanks a lot

Discuss-gnuradio mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]