[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP2-FLEX2400 Transmit and Receive problems
From: |
Marcus D. Leech |
Subject: |
Re: [Discuss-gnuradio] USRP2-FLEX2400 Transmit and Receive problems |
Date: |
Tue, 31 Aug 2010 21:20:48 -0400 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.11) Gecko/20100720 Fedora/3.0.6-1.fc12 Thunderbird/3.0.6 |
On 08/31/2010 01:48 PM, Joseph Wamicha wrote:
Hi Leech,
Thank you for your response. I'm using 2.4 GHz characterized antennas.
No I'm not feeding the signal directly into the USRP2. I have a 2.4GHz
resonant monopole antenna on the signal generator and another 2,
2.4GHz resonant antennas on both the RX and TX/RX SMA connectors of
the FLEX2400.
How close are the antennae?
What parameters did you pass to usrp2_fft.py? If you look closely at
the spectrum, it looks
*perfectly* symmetrical about DC, which should never be the case if
all the "pieces" agree
that this is a complex signal.
What happens if you tune usrp2_fft.py a few Khz away from 2.4GHz exactly?
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org