[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Dimension of the y axis using usrp_oscope.py

From: William Cox
Subject: Re: [Discuss-gnuradio] Dimension of the y axis using usrp_oscope.py
Date: Thu, 2 Sep 2010 13:04:17 -0400

It will be completely dependent on your receiver chain. My understanding is that the values you are seeing are the output of the ADC, so you'll need to figure out what the voltages at that point are. Perhaps someone else can be more helpful, but you'll need to do the legwork.
What receiver are you using?

On Thu, Sep 2, 2010 at 12:20 PM, Fabian Steiner <address@hidden> wrote:

I am doing some experiments using usrp_oscope.py. I am especially
interested in comparing the values obtained from the usrp devices and
those measured from a traditional oscope. Unfortunately one can't find any
hint which dimension (volts, etc.) is used for displaying the graph.

Thanks a lot for your help!

Cheers, Fabian

Discuss-gnuradio mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]