[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Problem in using trellis Error, correction en- an
Re: [Discuss-gnuradio] Problem in using trellis Error, correction en- and decoder
Fri, 29 Oct 2010 17:16:30 -0400
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:18.104.22.168) Gecko/20101027 Thunderbird/3.1.6
There are a couple of potential problems with your flowgraph:
1) the trellis encoder outputs unpacked bytes. For example, if your FSM
has output cardinality 4 then it outputs 2 useful bits per byte.
Are you sure you are handling this the right way at the packet encoder?
I do not know how that block works but you should check it.
however, the main problem is the following
2) You need to substitute the "trellis viterbi" by the "trellis viterbi
combo" block and input as parameters the kind of "distance" metric you
want and the corresponding constellation, etc. To do that you need to
know what is the output of the packet decoder...
I have never worked with packet en/decoder so i cannot help with these.
|[Prev in Thread]
||[Next in Thread]|
- Re: [Discuss-gnuradio] Problem in using trellis Error, correction en- and decoder,
Achilleas Anastasopoulos <=