discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Basic analog USRP2 transmitter


From: Marcus D. Leech
Subject: Re: [Discuss-gnuradio] Basic analog USRP2 transmitter
Date: Sun, 07 Nov 2010 14:05:44 -0500
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.12) Gecko/20100907 Fedora/3.0.7-1.fc12 Thunderbird/3.0.7

On 11/07/2010 02:00 PM, alexander levedahl wrote:
> I have tried transmitting an analog signal from one USRP2 to another,
> but when I run usrp2_fft.py on the rx computer, there is no receive
> signal.  The analog signal is supposed to be two tones at 350 and 440
> HZ transmitted at 2.6GHz.  Can anyone help me figure out what I am
> doing wrong?
>
> I have tried using GRC, but at the most up to date version does not
> work with Fedora, which is the OS that I have to use, this is for a
> research project with a professor at my university, and the mandate is
> to use Fedora, this does not look like it will change in the near
> future.  
>
> Alex
>
>   
I use GRC on Fedora all the time.  I have Fedora 11,12 and 13 on my
machines, and I use
  GRC on them all the time.

If you installed from a recent GIT source, GRC installs as
"gnuradio-companion" to not conflict
  with another piece of software called grc.




-- 
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org





reply via email to

[Prev in Thread] Current Thread [Next in Thread]